Advertisement
Quick Links
ACCENT LIGHTING SYSTEM
Feature:
• Adjustable Color Temperature:
Cool White to Warm White
(6500K - 3000K)
• Includes 2 - 15''(380mm) light bars
Expandable to 6 Light Bars
• Full dimming and brightness control
• Breath Mode and Sleep Timer
• Infrared remote control
• Up to 3 memory settings
• Voltage: Input 110/240V
Output: DC12V. Interchangeable
international plug heads
Salamander Accent Lighting Systems [500-337 v7.16]
SD/LS2/W USER MANUAL
HOME THEATER EXPERIENCE TIPS
•
rotating the LED light bar. Rotating the LEDs
outwards will broaden the lighted area while rotating
the LEDs inward will reduce the lighted area.
• Back lighting and highlights of TV's can reduce eye
strain while watching TV in low ambient light conditions.
• Optional expansion LED light bars are available in
lengths of 15'' (380mm) or 24" (610mm). These will
allow lighting of other areas such as large TV's,
speakers, book cases, etc.
WARRANTY
Salamander Electronic Accessories Warranty Limitations
Salamander provides a two (2) year Limited Warranty on Electronic Accessories.
This warranty covers the repair or replacement, at Salamander's option,of any
product defective in materials or craftsmanship.
For full Warranty see www.salamanderdesigns.com/
customerservice/warranty
www.salamanderdesigns.com | 800.535.5659
You can adjust the width of the illuminated area by
page 1 of 4
Advertisement
Summary of Contents for Salamander Designs SD/LS2/W
- Page 1 ACCENT LIGHTING SYSTEM SD/LS2/W USER MANUAL Feature: HOME THEATER EXPERIENCE TIPS • Adjustable Color Temperature: • You can adjust the width of the illuminated area by Cool White to Warm White rotating the LED light bar. Rotating the LEDs (6500K - 3000K) outwards will broaden the lighted area while rotating the LEDs inward will reduce the lighted area. • Includes 2 - 15’’(380mm) light bars Expandable to 6 Light Bars • Back lighting and highlights of TV’s can reduce eye strain while watching TV in low ambient light conditions. • Full dimming and brightness control • Optional expansion LED light bars are available in • Breath Mode and Sleep Timer lengths of 15’’ (380mm) or 24” (610mm). These will allow lighting of other areas such as large TV’s, • Infrared remote control speakers, book cases, etc. • Up to 3 memory settings • Voltage: Input 110/240V...
- Page 2 PARTS TYPE I TYPE C Power Supply Mounting Clips & Fasteners TYPE A TYPE G Interchangeable Plug Heads Digital Control Hub IR Remote IR Receiver (2x) 15” Lighting Bars WARNING DO NOT USE SCREWS TO FASTEN TO ELECTRONIC DEVICES OR SENSITIVE SURFACES. NEVER APPLY PRESSURE TO THE CLEAR TUBE.
- Page 3 INSTALLATION Select appropriate plug head and attach it to the power supply. (NOTE: There are FOUR different international heads included) Connect IR Receiver and Power Supply to Digital Control Hub. A. Mount Digital Control Hub in suitable location. B. Connect Power Supply to Digital Control Hub C. Connect IR Receiver to Digital Control Hub (NOTE: It is important to place the IR Receiver in a visible location for the Remote to interact with the IR Receiver) 3. Find Desired Location for Light Bars For Most installations the best location is usually behind the object about 1-4 inches from the outer edge. Try different positions for different objects until desired result is reached. For Cabinet Installations- Light bars maybe installed vertically along cabinet sides or horizontally under cabinet shelves.
- Page 4 5. Controller settings for the SD/LS2/W • POWER - ON/OFF • SLEEP TIMER- Turns system off in increments of 30 minutes. Push once for 30 minutes, push twice for 1 hour etc... up to a maximum of 6 hours. The system will confirm settings with a quick flash for each 30 minute increment. • BREATH- Slow fade in and out of light. Push to start/stop. • BRIGHTNESS- Press plus or minus icon to select desired brightness. 20 Brightness levels. Press and hold for rapid change. • F IRE & ICE- Adjustable White Color Temperature. From cool white to warm white (6500K - 3000K) • MEMORY- 3 lighting settings can be saved. PROGRAMMING MEMORY: 1. Choose favorite setting, then press the Memory button (M) 2. When lights flash twice, SELECT buttons 1, 2 or 3 to save 3. Check Memory button to be sure setting was saved. 4. If not saved repeat process. TO RESTORE MEMORY TO FACTORY SETTINGS: Press the “Power” button to turn off. Then in sequential order press...