Related Manuals for Elite Screens ZCU1
Summary of Contents for Elite Screens ZCU1
- Page 1 Universal Ceiling Trim Kit Part numbers: ZCU1, ZCU2, ZCU3, ZCU4, ZCU5 In-ceiling trim kit for Elite Electric Screens User’s Guide 080415-JA www.elitescreens.com...
-
Page 2: Installation
Hardware and Parts List 2. Brackets for VMAX 2 (below 135”) 1. Assembly Plank Left x 1 pc Right x1 pc Right x 1pc Left x 1 pc 3. Brackets for VMAX 2 (135”-170”) 4. Brackets for Home 2 Left x 1 pc Right x 1pc Left x 1 pc Right x 1pc... - Page 3 VMAX 2 Series 135”-170 (3) HOME2 Series (4) CineTension2 Series (5) VMAX Tab-Tension Dual Series (6) 2. Attach the Ceiling Panel (9) with the Connector (7). M5 Screws Ceiling Panel Connector...
- Page 4 3. Insert the Assembler (8) into to the groove of the Ceiling Panel (9) Assembler 4. Attach the Assembly Plank (1) to the Ceiling Panel (9) and secure with M4 screws (14) on both sides as shown below. Assembly plank M4 Screws Assembly plank Note: Step 5 only applies to a VMAX Tab-Tension Dual Series Installation.
- Page 5 ATTACH THE SCREEN TO THE TRIM KIT 1. Adjust the distance of the Assembler (8) to your screen as shown below and lightly secure with the M6 Screw. Note: Do not fix the M6 nut until attaching the Suspension Bar M5 Screw M5 Screw M6 Screw...
- Page 6 2. Adjust the level and secure the Assembler (8) with the M4 screws (13). M4 Screw 3. Cut the Suspension Bar (10) to your required length and install it on the bracket and secure with the M6 nut (11). M6 Nut M6 Screw 4.
- Page 7 5. If your screen is the VMAX84H, VMAX100H, Home120H or Home150V, you can assemble the Universal Ceiling kit without the Connector (7). VMAX84H & VMAX100H Home120H & Home150V Bracket Assembly Plank Suspension Bar Suspension Bar Bracket Assembly Plank For a local Elite Screens contact or Technical Support, please visit www.elitescreens.com...