Appendix; Troubleshooting; Status Led; Reset And Restore - Vivotek PT7135 User Manual

Appendix

A. Troubleshooting

Status LED

The following table lists the LED patterns in general.
Condition
Loading system after power on
During booting procedure
Detecting and setting network
After network is setup (system up)
During the upgrade firmware process
Enable audio

Reset and restore

LED color
Steady red, blue, green
Steady red, blue, green
Steady green and blue. Blink red till physical
network and IP address are confirmed.
Blink green every second and steady red
Blink green every second and fast blink red
Steady blue. Disable audio will turn off blue
LED.
There is a button in the back side of the Network
Camera. It is used to reset the system or restore the
factory default settings.
RESET: Click on the button.
RESTORE:
1. Press on the button continuously.
2. Wait for all LED blink fast.
3. Free the button.
- 51 -
www.vivotek.com