Table of Contents
Advertisement
Software Installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant
user access to the camera.
At the end of the hardware installation, the Administrator must place the product
software CD into the CD-ROM drive of the PC running in MS Windows. An auto-run
program will pop up (If the program is not on auto-run, go to the root directory of the
software CD and click on "autorun.exe").
Click on the IP installer and run Vivotek' s Installation program.
Install the Network Camera on Ethernet before install it on WLAN. Refer to the
network setting chapter to setup wireless network parameters.
- 8 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Advertisement
Table of Contents
