On-Screen Set Up - Hitachi 65QLEDSM20 User Manual

On-Screen Set Up

Make sure equipment is properly connected (as shown on page
10-11) before connecting the TV to power.
First Time Setup Menu
When you turn the TV on for the first time, the First Time Setup Menu will
appear.
Follow the prompts using the
preferences. You will be guided through:
1. Remote Pairing 2. Language
6. Location 7. Help Improve Android
11. Timezone 12. TV Mode 13. Chromecast built-in always available
If you make an error, you can update your preferences in the settings
menu later.
16 | ON-SCREEN SET UP
On/Standby light is RED in
standby mode.
On/Standby light is OFF
when the TV is on.
/ / / / OK buttons to select your
3. Quick Setup 4. WiFi Setup 5. Terms Of Service
8. Google Assistant 9. Country
14. Channel Scan
1. Press and hold the MENU and LEFT buttons at the same time
for 5 seconds and let go.
2. When "SmartTV-RC" appears on the top-right corner of the
screen, press the OK button to initiate pairing. Once paired,
screen will automatically go to the next step.
3. If pairing was unsuccessful, wait 30 seconds and try again.
Note: Don't worry if you fail to pair the remote, you can still go through the
setup process and pair the remote later by going to Settings > Remotes &
Accessories.
3. Quick Setup
NOTE: To use your Android TV, you will need a Google Account.
There are 3 options to set up your TV:
1. Quick Start using an Android phone: Your Android TV will
10. Password
automatically connect to the Wi-Fi network and Google
account that the Android phone is connected to.
2. Set up with your remote: Use the remote to manually enter
Google account and connect to Wi-Fi.
3. Set up with a phone or computer: Make sure your phone
or computer is on the same Wi-Fi network as the TV is
connecting to.
5s