LLOYTRON MIP SYSTEM 3 B7835 Operating Instructions Manual

LLOYTRON MIP SYSTEM 3 B7835 Operating Instructions Manual

Motion sensor transmitter

Advertisement

Quick Links

OPERATING INSTRUCTIONS
Motion Sensor
Transmitter
MODEL: B7835

Advertisement

Table of Contents
loading

Summary of Contents for LLOYTRON MIP SYSTEM 3 B7835

  • Page 1 OPERATING INSTRUCTIONS Motion Sensor Transmitter MODEL: B7835...
  • Page 2: Table Of Contents

    Thank you for the purchase of this quality LLOYTRON MIP SYSTEM 3™ product. Used carefully and in accordance with the instructions enclosed, it should give you trouble free performance over a long period of time. Please retain these instructions for future reference.
  • Page 3: Out Of Box

    OUT OF BOX Inside this box; 1x PIR Motion Sensor Transmitter Screws and Stick Pad 1x Operating Manual You will be required to Link/Programme this sensor to your other MIP System™ Chime Units. See section on Link / Programme devices IMPORTANT SAFEGUARDS AND PRECAUTIONS SAVE THESE INSTRUCTIONS •...
  • Page 4: Wireless Distance

    WIRELESS DISTANCE This wireless Door Chime has an unobstructed operating distance of 200 meters, but local conditions and the number of walls, doors and material affect this. Metal door frames and other factors may interfere with the signal and reduce the operating distance To extend this distance, we suggest using the Signal Booster accessory.
  • Page 5: The Generation Gap

    THE GENERATION GAP The new MIP System 3™ is the third generation and is compatible with all previous generations, wherever you see these symbols. The 3rd generation has evolved and offers much more than the previous generation: • Choose 4 consecutive tunes for different bell pushes or transmitters* •...
  • Page 6: Link / Programme Devices

    LINK / PROGRAMME DEVICES You will be required to link/programme this new accessory to your existing MIP System™. It is advisable to link before you mount the Motion Sensor Module. Note: for easy programming, keep the Motion Sensor Transmitter and chime unit close together whilst linking/ programming.
  • Page 7: Installing The Pir Motion Sensor

    INSTALLING PIR MOTION SENSOR MODULE The PIR Motion Sensor module is ideal for sheds, garages and hallways etc. It will activate any linked door chime receiver every time it detects movement within a 5m range. The unit is splashproof and is suitable for use outside. Please note that birds, pets and other animals may also trigger the device.
  • Page 8: Different Tune Different Bell Push

    DIFFERENT TUNE DIFFERENT BELL PUSH Inside all MIP System 3™ transmitters (including bell pushes, sensors and modules) you will find a series of switches which allow you to choose one of four consecutive sounds on any compatible chime unit so you can identify which transmitter has been triggered. You can have up to four chime sounds play on different transmitters, but please note, these chime sounds cannot be chosen at random.
  • Page 9 4TH CHIME SOUND Position the micro switch as shown in the diagram to set the transmitter to play the 4nd chime sound on the paired chime unit. WARNING These settings are NOT compatible with non-MIP products or first generation MIP System™ 1, but are compatible with the Second generation MIP System 2™and Third generation MIP System3™ Door Chimes. If not compatible, then leave on Default setting otherwise no activation will be made and it will not sound on the chime unit.
  • Page 10: Trouble Shooting

    TROUBLE SHOOTING QUERY SOLUTION Check the battery is inserted is correct polarity and No blue light on the bell push when pressed is not dead. Check that switch settings inside the bell push are No Sound when bell push is pressed, bell push on default.
  • Page 11: Cleaning And Care

    CLEANING AND CARE Wipe the accessory with a clean soft lint free cloth to remove dirt and dust. DO NOT • Do not use abrasives, detergent or solvent on any surface. WEEE/ENVIRONMENTAL PROTECTION DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT Do not dispose of this product with household waste. For the proper treatment, recovery and recycling please take this product to the appropriate waste collection point.
  • Page 12: Mip Accessories

    CUSTOMER SERVICES If you have any queries about this product then please contact Lloytron Customer Services online at: www.lloytronhelpdesk.com To find out more about Lloytron MIP System products, visit www.doorbellsolutions.com Distributed by Lloytron Plc, Laltex House, Leigh, England WN7 3XH...

Table of Contents