Summary of Contents for HighTek HK-880
- Page 1 HK-880 Use’s Manual Serial Device Server Shenzhen FangXingLiuTong Industrial Co.,Ltd...
-
Page 2: Specifications
The HK-880 series serial device server none needs heavy investment to replace or upgrade, it can let the original RS-232/485/422 serial industry control equipment immediately have a network to unite capability with each other, provide efficient, safe, stable data gateway for the serial orifice data information. - Page 3 www.szhightek.com Serial Interface Interface：1-port RS-232/422/485(software selectable) Port Type：Male DB9 RS-232 Signals：TXD, RXD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Signals：TX+, TX-, RX+, RX-, GND RS-485 Signals：RS485+, RS485-, GND Protection: 400W TVS protection Serial Communication Parameters: Parity：None, Even, Odd Data Bits：5, 6, 7, 8，9 Stop Bit：1, 1.5, 2 Flow Control：RTS/CTS, DSR/DTR, Xon/Xoff Transmission Speed：110~460.8Kbps...
-
Page 4: Chapter 2 Hardware Installation
www.szhightek.com Chapter 2 hardware installation 2.1 equipment structure 2.2 Equipment installation 2.2.1 Connect network Shenzhen FangXingLiuTong Industrial Co.,Ltd... - Page 5 HK-880 serial device server product provide normal Ether net port, support MDI/MDI-X, It can link parallel wire and exchange equipment, such as exchange machine, and HUB etc. or link secant wire and terminal equipment, such as Router and PC etc..
-
Page 6: Web Browser Management
3.1.1 Web browser management Confirm to HK-880 serial device server and net are connect normally and keep it in the same net range with the computer what equipment you want to enter, if you don’t know the equipment IP, you can used Console control plate and dummy serial software to search the equipment IP. - Page 7 Quick setup HK-880 provide quick setup function, user can use the function to setup the serial device server step by step, the operation is very easy despite you never used the serial device server product, use the function can collocate...
- Page 8 HK-880 serial interface through the net Server setup You can collocate the HK-880 equipment net parameter in the serial device server interface, they are included equipment name, IP, subnet mask, gateway, DNS server1, DNS server2, DHCP and Ethernet work mode: Shenzhen FangXingLiuTong Industrial Co.,Ltd...
- Page 9 Auto is the default mode of Ethernet, user can set to 100M full/half and 10M full/half If user need to use the HK-880 to access internet domain name, fill the main and secondary IP into the DNS server 1 and DNS server 2 are necessary, so that can use the domain name server to explain the IP which domain name you want to access.
- Page 10 Operation mode Real COM The each serial interface of the serial device server can reflect the serial interface of HK-880 to fictitious serial interface local machine through the driver(Windows Virtual COM/Linux TTY）. Real COM collocate as picture: ...
- Page 11 When HK-880 product work on the TCP Client mode, it can connect the TCP terminal interface of network actively such as PC server and distant HK-880 (TCP Server style) etc.. So need to tell HK-880 which net address and TCP terminal interface should be connected through corresponding setup. When have connected TCP, HK-880 will send out the data from the serial interface through Socket and send the data from the Socket to serial interface at the same time.
- Page 12 When HK-880 serial device server work on the TCP Server mode, its local TCP interface is on interception and wait for other terminal machine or distant HK-880 which work on the TCP Clint mode to connect the local interface, serial device server will receive and send data through the Socket after connect each other, The mode mainly used for the network environment of HK-880 passive connectivity distant equipment It need to fill in local interface on the TCP Server mode, opposite machine and interface isn’t need to fill in...
- Page 13 HK-880 provide the search function of current interface status, user can see the information about connection and data transmission of each interface, it is easy to help user control the running of HK-880 and analyze the trouble of the net. It can search the TCP status, UDP status and serial interface status in the “System status” as picture: It can see all connection and data transmission of current equipment on the TCP status.
- Page 14 System management System management provide the software and hardware information of HK-880 serial device server and recover function as picture: Click “Load Factory default” and “YES” according to the note, then the system can be recovered to original plant default...
- Page 15 Safety setup HK-880 serial device server can set password to limit enter equipment and set the IP or MAC address filtration list as picture Change password: user can modify the user name and password. Equipment original user: admin, password: admin...
-
Page 16: Chapter 4 Software Installation
Save/reboot When finished the setup of HK-880 serial device server, it can save the information of HK-880 as Flash memorizer through the “save/reboot”, then restart equipment and release the information as picture: Chapter 4 software installation 4.1 software installation 4.1.1 system requirement... -
Page 17: Software Setup
IP which equipment was searched, run web browser, fill the IP address to enter web setup interface of HK-880 You can reflect HK-880 to dummy COM interface which be list on the serial interface option, click the setup to fill in IP address and serial number etc. - Page 18 www.szhightek.com Attachment： Interface line order RS-232/485/422 DB9 Pin (Male) interface line order RJ45 DB9-M RS-232 RS-422/485(4W) RS-485(2W) RJ-45 Signal DCD (in) TXD- RXD (in) TXD+ TXD(out) RXD+ Data+ DTR (out) RXD- Data- DSR (in) RTS (out) CTS (in) Shenzhen FangXingLiuTong Industrial Co.,Ltd...
- Page 19 www.szhightek.com Shenzhen FangXingLiuTong Industrial Co.,Ltd...
Need help?
Do you have a question about the HK-880 and is the answer not in the manual?
Questions and answers