Vivitar VIVICAM 620HD User Manual page 27

3) Press the UP or DOWN direction control buttons to scroll through the menu options.
4) Press the Shutter/OK button to select and save the desired option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
8) Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Firmware (Factory Default Settings) Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to
the Factory Default Settings.
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware menu.
The "Default Setting" is selected.
3)
4) Press the Shutter/OK button to reset the camera to the factory default settings.
5) You will be asked to confirm the resetting to the factory default settings.
Select "No" to exit the menu and return to the previous mode without resetting to the default
6)
settings.
 Select "Yes" and press the Shutter/OK button to proceed with the reset.
You will then automatically exit the menu and return to the previous mode with the digital
camera settings set to the Factory Default Settings.
Note: After RESETTING to the default settings, it is recommended to select your system
Language and Date/Time. If you do not, the next time your camera is powered on, you will be
prompted to define those settings.
26