HAPRO Luxura X10 Owner's Manual page 18

Qsens settings menu
10 Blinktime LED 5
0
11 Delay 2
0
12 Facialcooler delay
50
13 Facialcooler speed
5
6
Airco:
5
6
1. Unit
2. Visual
3. Qsens
4. Airco
Airco settings menu
1 Airco at start ON
5
6
Facial cooler speed:
Setting for the speed of the facial cooler.
Select Facialcooler speed. ( 13 )
Scroll to change the setting. ( 0 - 100 %)
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
Go to the configuration menu (from left to right)
Use the scroll button to select the Airco option.
Press 'Start' to enter the Airco sub-menu.
Airco at start:
Select Airco at Start
Scroll to change the setting.
On : Air conditioning switches on simultaneously with the sunbed
Off : Air conditioning does not switch on simultaneously with the sunbed
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
- 18 -