Samsung HW-T400 Full Manual
Hide thumbs Also See for HW-T400:

Advertisement

FULL MANUAL
HW-T400
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at www.samsung.com/register

Advertisement

Table of Contents
loading

Summary of Contents for Samsung HW-T400

  • Page 1 FULL MANUAL HW-T400 Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register...
  • Page 2 • This product contains chemicals known to the Refer to the table below for an explanation of State of California to cause cancer and birth symbols which may be on your Samsung product. defects or other reproductive harm. CAUTION CAUTION •...
  • Page 3 This equipment generates, uses and approved recycler. To find the nearest recycling can radiate radio frequency energy and, if not location, go to our website:www.samsung.com/ installed and used in accordance with the recycling Or call, 1‐800‐SAMSUNG instructions, may cause harmful interference to WARNING: Cancer and Reproductive Harm radio communications.
  • Page 4 PRECAUTIONS 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce 1. Ensure that the AC power supply in your heat. house complies with the power 9. Do not defeat the safety purpose of the requirements listed on the identification polarized or grounding-type plug.
  • Page 5 See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsung’s on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website.
  • Page 6: Table Of Contents

    CONTENTS Checking the Components Inserting battery (AAA) into the Remote Control ------------------------- Product Overview Front / Right Side Panel of the Soundbar ------------------------- Bottom Panel of the Soundbar ------------------------- The Remote Control Using the Hidden Buttons (Buttons with more than one function) ------------------------- Adjusting the Soundbar volume with a TV remote control -------------------------...
  • Page 7 System Initialize Installing the Wall Mount (Optional) Installation Precautions ------------------------- Wall mount Components ------------------------- Software Update Update Procedure ------------------------- When update fails ------------------------- Troubleshooting License Open Source License Notice Important Notes About Service Specifications and Guide Specifications ------------------------- ENG - 7...
  • Page 8: Checking The Components

    • For more information about the power supply and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit) • To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.
  • Page 9: Product Overview

    02 PRODUCT OVERVIEW Front / Right Side Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top. Volume Power Right Side of the Soundbar The LED Indicator flashes, glows, or changes color depending on the Soundbar's current mode or status.
  • Page 10: Bottom Panel Of The Soundbar

    You can activate your Bluetooth connection by placing your phone in the NFC detection area Logo of the Soundbar. Selects the source input mode. (D.IN / Bluetooth / AUX / USB) • To turn on “Bluetooth pairing” mode, change the source to “Bluetooth” mode and then Source press and hold the button for more than 5 seconds.
  • Page 11: The Remote Control

    03 THE REMOTE CONTROL • The images, buttons, and functions of the remote control may differ depending on the model. Press this button to mute the sound. Press it again to unmute the sound. Turns the Soundbar on and off. Push this button up or down to Press to select the desired adjust the bass volume within a -6 to...
  • Page 12: Using The Hidden Buttons (Buttons With More Than One Function)

    Using the Hidden Buttons (Buttons with more than one function) Hidden Button How to Use the Remote Control Remote Control Function Button – D.IN / Bluetooth / USB / AUX Mode : If there is no audio signal for 18 minutes. –...
  • Page 13 Press the button for 5 seconds in the power on station to trigger the Bluetooth Power On/Off function. LED indicator Bluetooth Power On/Off Blinking Blinking Bluetooth Power On Bluetooth Power Off Auto Power Link For detailed information about Auto Power Link On/Off function, please On/Off see “Auto Power Link”...
  • Page 14: Adjusting The Soundbar Volume With A Tv Remote Control

    Samsung TV. First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your Samsung remote to control the Soundbar’s volume. For more information, see the TV’s user manual.
  • Page 15: Connecting The Soundbar

    04 CONNECTING THE SOUNDBAR Connecting Electrical Power • For information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit) Electrical Outlet POWER AUX IN DIGITAL AUDIO IN POWER (OPTICAL) USB (5V 0.5A)
  • Page 16: Connecting To A Tv

    05 CONNECTING TO A TV Hear TV sound from your Soundbar through wired or wireless connections. • When the Soundbar is connected to selected Samsung TVs, you can control the Soundbar using the TV’s remote control. – This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable.
  • Page 17 Step 2. Change the Soundbar’s mode to D.IN (OR) Right Side of the Soundbar Auto Power Link This Function automatically turns on the Soundbar when the TV is turned on if the Soundbar is connected to the TV by an Optical Cable (not supplied). Press and hold the button on the remote control for more than 5 seconds to toggle this function.
  • Page 18: Connecting A Tv Or Bluetooth Device Via Bluetooth

    If the TV or device fails to connect • If a previously connected Soundbar listing appears in the device list of your TV or Bluetooth device, delete it. (e.g. “[AV] Samsung Soundbar T400 T-Series”) • Then repeat steps 1 through 3.
  • Page 19: Connecting A Soundbar To A Mobile Device Via Nfc Function

    Disconnecting the Soundbar from the TV Press the button on the right side panel or on the remote control and switch to any mode but “Bluetooth”. • Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) •...
  • Page 20 – You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function. – Once you have paired the Soundbar to a Bluetooth device, selecting “[AV] Samsung Soundbar T400 T-Series” from the device’s scanned devices list will automatically change the Soundbar to “Bluetooth”...
  • Page 21 Bluetooth Power On/Off If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth Power function is on and the Soundbar is turned off, the Soundbar turns on automatically. Press and hold the button for more than 5 seconds in the power on station to trigger/shut off Bluetooth Power On function.
  • Page 22: Connecting An External Device

    06 CONNECTING AN EXTERNAL DEVICE Connect to an external device via an optical cable or analog cable to play the external device’s sound through the Soundbar. Connecting using an Optical Cable Step 1. Connect using an Optical Cable BD / DVD player / Set-top box / Game console AUX IN DIGITAL AUDIO IN...
  • Page 23: Connecting Using An Analog Audio (Aux) Cable

    Connecting using an Analog Audio (AUX) Cable Step 1. Connect using an Analog Audio (AUX) Cable BD / DVD player / Set-top box / Game console - AUDIO - - AUDIO - AUX IN AUX IN Audio (AUX) Cable (not supplied) Bottom of the Soundbar DIGITAL AUDIO IN DIGITAL AUDIO IN...
  • Page 24: Connecting A Usb Storage Device

    07 CONNECTING A USB STORAGE DEVICE Step 1. Connect a USB Drive Bottom of the Soundbar USB (5V 0.5A) NOTE – The Soundbar automatically turns off (Auto Power Off) if you do not connect a USB device to the Soundbar within 18 minutes. Step 2.
  • Page 25: Setting Repeat Play Options

    Setting Repeat Play Options Repeat play When the Soundbar is in “USB” mode, each time you press the button the “USB” mode changes how it plays tracks in the following order: “Repeat - Off” > “Repeat - 1 song” > “Repeat - All songs”. See the table below for details.
  • Page 26 File Format Type Compatibility list Extension Codec Sampling Rate Bitrate *.mp3 MPEG 1 Layer2 16kHz ~ 48kHz 80kbps~320kbps MPEG 1 Layer3 16kHz ~ 48kHz 80kbps~320kbps MPEG 2 Layer3 16kHz ~ 48kHz 80kbps~320kbps MPEG 2.5 Layer3 16kHz ~ 48kHz 80kbps~320kbps *.wma Wave_Format_MSAudio1 16kHz ~ 48kHz 56kbps~128kbps...
  • Page 27: System Initialize

    08 SYSTEM INITIALIZE Blinking X 2 5 Sec Right Side of the Soundbar With the Soundbar on, press the (Volume) buttons on the body at the same time for at least 5 seconds. CAUTION – All the settings of the Soundbar are initialized. Be sure to perform this only when initialization is required.
  • Page 28: Installing The Wall Mount (Optional)

    09 INSTALLING THE WALL MOUNT (OPTIONAL) Installation Precautions • Install on a vertical wall only. • Do not install in a place with high temperature or humidity. • Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another installation point.
  • Page 29 NOTES – If your TV is installed on the wall, install the Soundbar 2 inches (5 cm) or more below --- 14.6” (370 mm) --- your TV. – Use a pencil to mark the holes’ positions. CENTER LINE 2’’ (50 mm) 0.25’’...
  • Page 30 POWER AUX IN DIGITAL AUDIO IN POWER (OPTICAL) USB (5V 0.5A) AUX IN DIGITAL AUDIO IN POWER (OPTICAL) USB (5V 0.5A) NOTE CAUTION – Supports for wall installation are built – Press the Soundbar down with sufficient into the back of the Soundbar. force to fix it to the wall.
  • Page 31: Software Update

    Important: Make sure there are no music files on the USB thumb drive. This may cause the firmware update to fail. USB (5V 0.5A) 2. Go to the Samsung website at (samsung. com) select Enter Model Number and  enter the model of your Soundbar. Select...
  • Page 32: When Update Fails

    When update fails 1. Turn off the Soundbar, disconnect and then reconnect the USB storage device that contains the update files to the Soundbar’s USB port. 2. Disconnect the Soundbar’s power cord, reconnect it, and then turn on the Soundbar. NOTES –...
  • Page 33: Troubleshooting

    Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). The unit will not turn on.
  • Page 34: License

    Bluetooth • If you have a problem with this product, we SIG, Inc. and any use of such marks by Samsung strongly recommend you read the Electronics Co., Ltd. is under license. Other...
  • Page 35: Specifications And Guide

    LPCM 2ch, Dolby Audio™ (DTS 2.0 sound is played in DTS format.) (supporting Dolby® Digital), DTS NOTES – Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. – Weight and dimensions are approximate. ENG - 35...
  • Page 36 LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited...
  • Page 37 QUESTIONS OR COMMENTS? AREA CALL OR VISIT US ONLINE AT WRITE Samsung Electronics America, Inc. 1-800-SAMSUNG IN THE US www.samsung.com/us/support 85 Challenger Road (726-7864) Ridgefi eld Park, NJ 07660 © 2020 Samsung Electronics Co., Ltd. All rights reserved.

Table of Contents