Haier LE32K6000D Owner's Manual page 21

Fav
Favourite
Press ▼▲ to choose the program, press the FAV button
on the remote control and it will show
right side of the program name and it will be added to
a Favourite List in your TV.
Choose the FAV program, press FAV button again, you
can cancel the FAV and
Once your Favourite List is created, you can press the
FAV key on the remote control during TV reception
to quickly access your favourite channels.
5). Signal Information:
Displays the signal information in DTV (digital TV)
mode only.
6). Software Update (USB):
WARNING: Do not attempt to use this option unless
you have a valid software program for the TV stored
on a compatible USB drive, and the drive is connected
to the TV. Remove the antenna cable from the TV RF
port, go to the channel Menu, select "Software Update
(USB)" and press OK to run the update.
2. PICTURE MENU
The second item of the MENU is PICTURE MENU.
You can adjust picture effects here, such as contrast,
brightness, etc.
Press ▼ ▲ to move, press OK to adjust.
Picture Mode
CHANNEL
Color Temperature
Aspect Ratio
PICTURE
Noise Reduction
SOUND
Screen
TIME
OPTION
LOCK
MENU
Picture Mode Standard
Contrast 50
Brightness 50
Color 50
Sharpness 50
Tint 50
MENU
on the
will disappear .
Back Move OK OK
Normal
Color Temperature
Red 50
Green 50
Blue 50
MENU
Screen
Auto Adjust
Horizontal Pos. 50
Vertical Pos. 50
Size 50
Phase 7
OK
NOTE:
1).Tint is available in NTSC system only.
2).There are three color temperature modes that can be
selected: Normal, warm, cool
3).The Aspect Ratio option allows you to manually
select either 4:3 or 16:9 screen ratios.
For general use leave this setting in the Auto position.
4).The Screen option is only available once the Input
Source is set to "PC", which allows you to adjust
Horizontal position, vertical position, size and phase
or select an Auto Adjust mode.
5).For improved video processing, access to the
Colour adjustment may not be available in the Picture
Mode (User) area when the TV is used with some
progressive scan video modes from externally
connected equipment. If adjustment of the Colour
control is required to correct defective source
material, change the video mode of your connected
equipment to an interlaced format.
The TV's default for Picture Mode is the "Standard"
setting, which is recommended for home viewing.
3.SOUND MENU
The third item of the MENU is the SOUND MENU.
You can adjust the sound effect here such as treble,
bass, balance etc. Press ▼▲ to move, press OK to
adjust.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
Note:
Auto volume: only available when the input signal
volume is too large or there is distortion.
-20-
TV OPERATION
.
Sound Mode
Balance
Auto Volume
S urround Sound
COAXIAL MODE
Back Move
MENU
OK OK