Vivitar Tripod/Video Equipment Manual page 66

[Set-up2] settings
Item Functional Description
USB Mode Selects to choose one of the following modes for further settings.
* PC / PictBridge
TV Sets video output of the ViviCam 8400 for matching the video output system of
NTSC the equipment that you are going to connect to the ViviCam 8400.
PAL
* PAL / NTSC
LCD Brightness This sets the brightness of the LCD monitor.
The adjustment range is from -5 to +5.
Auto Shut Down If no operation is performed for a specific period of time, the power to the ViviCam 8400
is automatically turned off. This feature is useful to reduce battery wear.
* 2 Min. / 3 Min. / 5 Min. / Off
[Set-up3] settings
Item Functional Description
Reset Number Sets whether or not to reset the file number when you take photographs. This
creates a new folder. The captured images are recorded to the newly created
1
folder from number 0001. If you want to reset the file number, be sure that no
images are recorded in the internal memory or the SD memory card.
* Yes / No
Set to Default Returns all basic settings to the ViviCam 8400's default settings. The time setting
D
will not be reset.
* Yes / No
Version This displays the current firmware version of the ViviCam 8400.
V.
EN-66