Vivitar ViviCam 7022 User Manual page 15

Macro Switch /
Your camera contains a Macro Switch that allows you to manually enable or disable the Macro
mode on your camera. While using the Macro mode, you can capture images at close range (30
~ 45 cm). To turn the Macro mode ON, slide the Macro Switch up on the side of your camera to
the flower icon. When enabled, the Macro mode will allow your camera to focus on an object
that is close to the camera. The icon
mode is on.
To turn Macro mode OFF, slide the Macro Switch down on the side of the camera to the mountain
icon. The icon
from 1.5m - infinity.
Note:
 Using Flash, Face Detect, and Smile Capture:
The Macro mode must be turned OFF when you want to use the following features of your
camera: Flash, Face Detect and Smile Capture.
 Slide the Macro Switch to the mountain icon
appear on the LCD display.
will appear on the LCD and indicates that the Macro
will appear on the LCD. When Macro mode is off, images can be captured
to turn Macro mode OFF. The
14
icon will