Advertisement
with the
with the
pull the
pull the
shaver (2).
shaver (2).
unit with the
unit with the
e cleaning
e cleaning
he shaver.
he shaver.
ds
ds
cohol to clean
cohol to clean
PQ208̲99-55̲CS3改訂.indd 22
1
1
Switch off the shaver.
Switch off the shaver.
2
2
Press the release button (1) and pull the
Press the release button (1) and pull the
shaving unit straight up off the shaver (2).
shaving unit straight up off the shaver (2).
3
3
To remove the retaining frame, push the sides
To remove the retaining frame, push the sides
of the central spring towards each other (1).
of the central spring towards each other (1).
Then lift the retaining frame out of the shaving
Then lift the retaining frame out of the shaving
unit (2).
unit (2).
4
4
Slide the shaving heads out of the retaining
Slide the shaving heads out of the retaining
frame. Remove and clean one shaving head at a
frame. Remove and clean one shaving head at a
time. Each shaving head consists of a cutter and
time. Each shaving head consists of a cutter and
a guard.
a guard.
Note: Do not clean more than one cutter and guard
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
at a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may take
accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is
several weeks before optimal shaving performance is
restored.
restored.
5
5
Remove the guard from the cutter.
Remove the guard from the cutter.
6
6
Clean the cutter with the cleaning brush. Brush
Clean the cutter with the cleaning brush. Brush
carefully in the direction of the arrows.
carefully in the direction of the arrows.
22
ENGLISH
ENGLISH
14.11.25 8:24:51 PM
Advertisement
