Advertisement
OWNER'S MANUAL
iENBL-111B
HOW TO USE YOUR iENBL DevKit?
Follow these instructions to start using the devkit
1.
2.
3.
Charge the iENBL
.
Charge the iENBL using a power adapter with micro-USB connection.
To charge the iENBL completely will take approximately 3 hours.
IMPORTANT: The power adapter should be specified to supply between 4.75V –
5.25V and 500mA – 2100 mA
First start-up
The iENBL device is delivered in a dedicated shipping mode, to exit this mode
and start the device press and hold both buttons on the front of the device for
>10 seconds.
This will make the device start up for the first time and prepare it for
provisioning.
Steps for provisioning
Log on to your LoRa network providers website and follow their instructions to
enroll a new device using the DevEUI found on the iENBL device label.
After enrolling the device, use the generated AppEUI/JoinEUI and AppKey to
provision your iENBL device.
OWNER'S MANUAL PN IENBL-111B DRAFT
7
Advertisement
