Summary of Contents for KTI KE-ISA
- Page 1 KE-ISA ISA PnP Ethernet Card NE2000 Compatible Full Duplex Plug and Play User’s Guide...
- Page 2 FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated commercial environment.
-
Page 3: Table Of Contents
Table of Contents ISA PNP ETHERNET CARD......1 INTRODUCTION..........1 ISA P THERNET ......1 RODUCT EATURES ......... 2 ACKING ............. 3 INSTALLATION............4 ARDWARE NSTALLATION ......4 ONFIGURATION AND IAGNOSTICS ..... 4 Running Plug and Play mode......4 Running Jumperless (NE2000) mode ..5 Running Diagnostics........5 RIVER NSTALLATION... -
Page 4: Isa Pnp Ethernet Card
Introduction Congratulations on your purchase of a PnP Ethernet adapter. This adapter was designed and manufactured to give you years of trouble-free and reliable service. ISA PnP Ethernet Card This ISA PnP Ethernet adapter is high performance NE2000 compatible Ethernet adapter with Plug-and-Play and full-duplex function The Plug-and-Play function can relieve the... -
Page 5: Product Features
Product Features Compliant to IEEE 802.3 10BASE-2 and 10BASE-T standards. Supports Microsoft’s Plug Play configuration for jumperless mode. Supports Full-Duplex Ethernet function to double channel bandwidth. Automatic port selection between 10BASE-2 interface(BNC) and 10BASE-T interface(RJ-45) On-board socket for remote Boot ROM. On-board switch socket Plug and Play (PnP) or Jumperless (NE2000) mode. -
Page 6: Packing List
Packing List The adapter package should contain the following items: One 16-bit PnP Ethernet adapter This User’s guide One 3.5” driver diskette One T-connector (for BNC port only) If any of these items are missing contact your reseller. -
Page 7: Installation
Installation Hardware Installation Turn OFF the computer, unplug the power cord and open the computer case. Pick a free ISA expansion slot and remove the expansion slot cover. Insert the adapter into the slot until it is fully seated. Secure the adapter. Replace computer cover... -
Page 8: Running Jumperless (Ne2000) Mode
Running Jumperless (NE2000) mode Please switch to NE2000 mode and execute RSET8019.EXE. A screen will guide you to configure the adapter to fit your computer system’s environment. Running Diagnostics select “Run Diagnostics” RSET8019.EXE menu to do the diagnostic check your Ethernet adapter. -
Page 9: Boot Rom Installation
drivers for Novell NE2000 adapter. You can also use the drivers supplied by the driver diskette that compatible with your Networking Operating System is under a separate directory. A HELP8019.EXE file under root directory lists the information and detailed installation procedure of all the available driver. -
Page 10: Product Specifications
Product Specifications IEEE 802.3 Standard 10BASE-2, 10BASE-T Wiring connector BNC and RJ-45 Bus Interface 16-bit ISA bus I/O address 200H, 220H, 240H 260H, 280H, 2A0H, 2C0H,2E0H, 300H, 320H, 340H, 360H, 380H, 3A0H, 3C0H, 3E0H IRQ Line 2(9), 3, 4, 5, 10, 11, 12, 15 Boot ROM address C0000H, C4000H,...
Need help?
Do you have a question about the KE-ISA and is the answer not in the manual?
Questions and answers