Installing Hardware; Quick Installation - VisionTek Theater 550 PRO User Manual

Installing Hardware

CHAPTER 2:
This chapter will guide you through the physical installation of your THEATER™ 550 PRO-based TV tuner card.

Quick Installation

Experienced users and system administrators can follow these brief instructions for installing the THEATER™ 550
PRO-based TV tuner card in the shortest possible time.
To perform a quick installation
1
Uninstall the drivers and software for any previous TV Tuner products if you have not already done so.
2
Shut down and disconnect the power from your computer system.
3
Remove any previously installed TV Tuner product.
4
Install your new THEATER™ 550 PRO TV tuner card.
5
Reassemble and connect your computer system.
6
Install the THEATER™ 550 PRO-based TV tuner card drivers and configuration software from the VisionTek
Installation CD-ROM by doing one of the following:
• Run through the automatic
•
Start > Run > X:\SETUP.EXE
7
Windows XP Media Center Edition version card – run setup wizard by pressing green button on remote control.
or
7
Windows XP Snapstream "Subscriber Edition" version card – install SnapStream software.
SETUP utility; or
(where is the drive letter of your CD-ROM drive).
X
6