Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Syba SY-ENC50082
Summary of Contents for Syba SY-ENC50082
- Page 1 USER MANUAL HDD Docking Station SATA to USB 3.0 with Charging & USB3.0 HUB...
- Page 2 Thank you for purchasing our HDD Docking Station. For your safety and the satisfaction of using this product, please read this manual carefully before installation. 1.0 Features Supports super speed USB3.0 up to 5Gbps Supports 2.5’’&3.5’’SATA I/II/III HDD or SSD ...
- Page 3 3.0 System Requirements USB3.0 port or USB2.0 port (if the device is connected to an USB2.0 port, the transfer speed will drop to 480Mbps) Windows 2000/XP/Vista/Win7/Win8/Mac OS 10.X or above (No driver installation needed) OTB function does not work under Windows 98 or Mac OS.
- Page 4 1.Make sure that those hard drives have no bad sectors. Bad sectors will cause unpredictable problems. 2.Put hard drives into the docking station. Please make sure that those hard drives are correctly and firmly connected to those SATA connectors of the docking station.
- Page 5 USB 3.0 Host / Battery Charge Any peripheral devices can be connected to the USB 3.0 HOST ports. You also can plug any portable devices by phone data cable for charging, like cellphone and tablet. OTB function (One Touch Backup) The OTB function lets you backup your data by just pressing one button.
- Page 6 Windows File System Formats There are two file system formats for windows user: NTFS and FAT32. Use NTFS if you will be using the drive only with Windows XP, Windows Vista and or Windows 7/8(performance will generally be greater when compared to FAT32).This file system is compatible in read only mode with Mac OS 10.3 and higher.
- Page 7 and format your HD in the Disk Management of Windows XP. The operation under Windows VISTA or Win7 is similar. Step 1:Right click on the “My Computer” icon,click ”Manage” to initialize the Disk Management program.You can also click “Start” -> ”Control Panel” -> ”Administrative Tools” -> “Computer Management”).
- Page 8 drive? Answer:see 3.0 section System Requirements Did you follow the correct installation steps for the specific interface and operating system? Answer:Review the 4.0 Hardware Setup Are both ends of the USB cable firmly attached? Answer: Check both ends of the USB cable and make sure that they are fully seated in their respective ports.Try disconnecting the cable,waiting 10s,and then reconnecting it.If the...
Need help?
Do you have a question about the SY-ENC50082 and is the answer not in the manual?
Questions and answers