Freedom Showers Flat Top Slot Series Installation Instructions

PLEASE READ THESE INSTALLATION INSTRUCTIONS THOROUGHLY PRIOR TO INSTALLING THIS SHOWER SEAT
IMPORTANT: THIS PRODUCT SHOULD ONLY BE INSTALLED BY QUALIFIED AND TRAINED PERSONNEL
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD LEAD TO IMPROPER INSTALLATION OF THE SHOWER SEAT,
STRUCTURAL AND/OR WATER DAMAGE TO THE WALL AND IN-WALL SUPPORT STRUCTURES, AND/OR SERIOUS
BODILY INJURY IN USE. IN ADDITION, ALL WARRANTIES, EXPRESS OR IMPLIED, WILL BE NULL & VOID DUE TO
IMPROPER INSTALLATION OF THIS PRODUCT. THE MANUFACTURER DOES NOT ASSUME ANY LIABILITY FOR DAMAGE
RESULTING FROM SERVICES PERFORMED BY OTHERS, OR FAULTY INSTALLATION, MISUSE OR MISAPPLICATION OF
GOODS.
THIS PRODUCT IS DESIGNED TO MEET OR EXCEED ALL LOAD REQUIREMENTS ESTABLISHED IN THE FEDERAL
SPECIFICATION #WW-P-541/8b AT 250 POUNDS OF FORCE. THE PERFORMANCE OF THIS PRODUCT IS SIGNIFICANTLY
IMPACTED BY THE STRENGTH OF THE WALL TO WHICH IT IS ATTACHED.
TO ASSURE PROPER AND SAFE INSTALLATION, THIS SHOWER SEAT MUST BE INSTALLED INTO A MINIMUM 2" THICK,
SOLID WOOD, IN-WALL BACKING MATERIAL. MAKE CERTAIN IN-WALL BACKING COMPLIES WITH ALL LOCAL BUILDING
CODE REQUIREMENTS.
MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT IS 400 LBS. WHEN PROPERLY INSTALLED.
1. Remove the Silhouette Shower Seat from the shipping carton. Carefully unwrap packaging as the Seat Back
Rest and mounting screws are packaged separately inside the carton.
Flat Top / Standard Slot Series
FREE OM
INSTALLATION INSTRUCTIONS
Lotus Series
Showers.com
Arch Top / Standard Slot Series
Champagne Series
Silhouette
Shower Seat
®
Page 1
of 4