Connecting The Earphone - Cello PD10 User Manual

DVD to snap the disc into place, and then close the disc cover.
5. Slide the power switch on the right side of the unit to power it on.
6. Press the OK or PLAY/PAUSE button on the unit to start playback.
In most cases, when you leave by the PLAY/PAUSE button, continue to be used by
PLAY/PAUSE button.
The DVD player will immediately start rendering the DVD program.
When you want to stop, press the STOP button, it will return to the power-on logo.
The player can be recharged while playback.
USB drive & SD/MMC card playback
Insert a USB drive into the USB port. Press DVD/USB/SD on the unit or DVD/USB/SD
●
on the remote to play the readable files in it.
Insert a SD/MMC Card into the SD/MMC Card port. Press DVD/USB/SD on the unit or
●
DVD/USB/SD on the remote to play the readable files in it.
NOTE: If it has not any U drive or memory card being inserted in the player, it will return to
DVD mode.

Connecting the Earphone

Connecting earphone
1. Connect the earphone. Earphone with a 3.5 mm stereo plug can be connected.
2. Adjust the volume by pressing the VOL+/VOL- buttons on the remote control.
The right side of the portable
Avoid listening to sound at levels which may be harmful to your ears.
5