Summary of Contents for Banana Hobby Sky Surfer V3
Page 1
*The Important Notice page must be read before you attempt to assemble this Please read the entire manual before attempting to assemble anything and before glider. This page contains important Banana Hobby policies and safety contacting Banana Hobby. For contact information, please go to the back of this information. manual.
Page 2
A. Fuselage I. Transmitter Length: 925 millimeters (about 36.5 inches) B. Main Wings J. Propeller Wing Span: 1400 millimeters (about 55 inches) C. Horizontal Stabilizer K. Wing Spar Wing Area: 26dm (Elevator) L. Control Horn (4) D. Vertical Stabilizer (Rudder) M. ...
Page 3
(626) 248-2888. We are open Mondays through Fridays 9 AM to 6 PM PST. Banana Hobby reserves the right to not To connect the adapter to a car battery, use the end with the red and black alligator comply with any missing parts request after 7 days have passed.
Page 4
3. Attach the aileron wires. Since there are 2 ailerons (1 on each wing) but both are controlled together by a single channel, they will need to be connected to a cable 1. Install the main wings. with a single end. Once you have the aileron wires (from the aileron Install one wing at a time.
Page 5
5. Attach the elevator servo to the horizontal stabilizer (elevator). Glue the horizontal stabilizer into the fuselage as shown. In order to control the movement of the elevator, you will need to attach the elevator servo arm to the control horn using one of the long linkage wires that run along the inside of the fuselage.
Page 6
This is a requirement for your safety and the safety of others. Failure to instructions below. If anything abnormal happens, report this to Banana Hobby follow these instructions can and may void your warranty. You must do a preflight immediately for technical support.
Page 7
You must never fly near any power lines Banana Hobby is not held responsible for crash damages as a result of the or places with high voltage or near buildings. Also, do not fly on the streets or user’s skill level.
Page 8
1. My motor is making a screeching noise. There may be something wrong with your motor and can be internal. Contact Banana Hobby as soon as possible and do not operate this glider with the same 1. My motor is running in reverse.
Page 9
2. I want to touch up on the glider. What type of paint can I use? binded. Attempting to rebind it can cause it to be unbinded and the transmitter You can use acrylic or water based paint. Banana Hobby does not supply such to lose connection with the receiver.
Page 10
5. Unpack the rest of the box’s contents. basically your controller. If you feel that you may want to return this glider back to Banana Hobby, do not go any further. Assembling any part of the plane will void any chances of Receiver: The device in your glider that receives the signals from the returning this item.
Page 11
You can reach Banana Hobby via email at help@bananahobby.com, via our online live chat systems on our website at www.BananaHobby.com to chat with a representative, or call us at (626) 248-2888. Our business hours are Monday through Fridays at 9 AM to 6 PM PST.
Need help?
Do you have a question about the Sky Surfer V3 and is the answer not in the manual?
Questions and answers