Table of Contents
Advertisement
SAFETY PRECAUTION
CAUTION:
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to "dangerous voltage"
and to prevent from a risk
of electric shock.
WARNING: Do not use this STB where contact with or immersion in water is a possibility. Do
not use near flower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc.
WARNING: Do not put the candle or lamp stand on the cabinet; otherwise, there is the danger
of fire.
WARNING: The unit should be connected to a power supply only of the type described in the
operating instructions or as marked on the unit. If you are not sure of the type of power supply (for
example, 120 or 230 V) to your home, consult your local dealer or local power company.
WARNING: This product install diodes. Do not open the cabinet or touch any parts in the inner
mechanism. Consult your local dealer for technical service if the opening is required.
Note: To ensure proper use of this product, please read this User manual carefully and
retain for further reference.
Note: This product install diodes. Do not open the cabinet to avoid the unit direct exposure to
radiation.
Unit Cleaning: After the unit power is turned off, you can clean the cabinet, panel and remote
control with a soft cloth lightly moistened with a mild detergent solution.
Attachments: Never add any attachments and/or equipment without the manufacturer
consent; as such additions may result in the risk of fire, electric shock, or other personal injury.
Locating: Slots and openings in the cabinet are provided for ventilation to protect it from
overheating. Do not block these openings or allow them to be blocked by placing the STB on a
bed, sofa, or other similar surface, nor should it be placed over a radiator or heat register.
Power-Cord Protection: Place the power-supply cord out of the way, where it will not be
walked on. Please take special attentions to cords at plugs, convenience receptacles, and the
point where they exit from the unit.
Object and Liquid Entry: Never put objects of any kind into this STB through openings, as
they may touch dangerous voltage points or short-out parts that could result in a fire or electric
shock. Never spill any liquid on the STB.
Warning:
To reduce the risk of
electric shock, don't open
the cabinet. Refer
servicing to qualified
personnel only.
i
The exclamation point
within an equilateral
triangle is intended to alert
the user to important
operating and
maintenance (servicing).
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Synaps CSD-300-M
Summary of Contents for Synaps CSD-300-M
- Page 1 SAFETY PRECAUTION CAUTION: Warning: The exclamation point The lightning flash with To reduce the risk of within an equilateral arrowhead symbol, within electric shock, don't open triangle is intended to alert an equilateral triangle, is the cabinet. Refer the user to important intended to alert the user servicing to qualified operating and...
- Page 2 Note: Moisture may be formed on the lens In the following conditions: when the unit is suddenly moved from a cold environment or an air-condition room to a warm place. immediately after a heater has been turned on. in a steamy or very humid room. If the moisture forms inside the unit, it may not operate properly.
-
Page 3: Table Of Contents
Contents CONTENTS 1. REMOTE CONTROL ....................... 5 2. FRONT PANEL ......................... 6 3.REAR PANEL ........................6 4.CONNECTING YOUR SYSTEM ..................6 5.BASIC OPERATIONS......................8 STB ..........................8 URN ON ............................8 OWER ..................... 8 HANNEL HANNEL - ....................... 8 OLUME OLUME ............................ - Page 4 Contents ........................26 OFTWARE PGRADE 9.3.1 Upgrade by RS232: ..............................26 9.3.2 OTA .................................... 26 9.3.3 Mailbox ..................................26 ............................27 ETRIS ............................27 NAKE ............................27 THELLO 10 TROUBLE SHOOTING ....................28 11 SPECIFICATIONS ......................29 11.1 ............................29 ENERAL 11.2 A/V M...
-
Page 5: Remote Control
Basic Operations Remote Control You can power on/off the receiver, operate on screen menu, and use a variety of hot key function. POWER To switch your receiver on from standby or standby to on. MUTE Used to enable or disable the audio NUMERIC KEYS Used to select channels or enter programming parameters TV / RADIO) -
Page 6: Front Panel
Basic Operations . Front panel STANDBY/ON: To switch the receiver power on/stand by MENUKEY To enter into the main menu. VOL<,> KEY: To adjust volume level, or to move cursor left or right in the menu. CH+,- or^, v KEY : To change channels, or to move cursor up or down in the menu OK KEY: To see TV/Radio channel list, or to confirm in the menu. - Page 7 Basic Operations Finally connect the coaxial cable from the LNB to the LNB IN jack on the receiver. _ With External Audio / Hi-Fi System To connect any external Audio Hi-Fi system, the receiver has been provided with two RCA connectors at the back of the receiver marked with Audio L and R.
-
Page 8: Basic Operations
Basic Operations 5.2 Power 5.Basic Operations 1 Press [Power] Key can enter the Standby state 2 In Standby state, press [Power] Key again can call 5.1 Turn on STB back the unit and go on play the previous channel First, press the [Device’s Main Power] to turn on the unit. 3 User can also disconnect the device’s main power When the STB is first used, there will play the first to end the Standby state. -
Page 9: Favorite
Basic Operations 5.9 Favorite 1 In full screen, press [FAV] key, it will display a window of “Favorite Group” on the left of the screen, which you can watch like below. 2 You can modify the audio track by press [Channel Up / Channel Down] key and modify the audio mode by press [Volume Up / Volume Down] key. -
Page 10: Tv/Radio
Basic Operations 2 Press [GREEN] key in each item can see more 4 Press [Green] key in Schedule menu can open detail information. timer menu. User can save a timer as he want. 3 Press [Red] key in EPG menu can display 5 In EPG menu, press [Exit] to close EPG screen. -
Page 11: Sleep
Basic Operations 2 Press [Left/Right] key to change satellite group. 3 Press [Up/Down] key to move highlight and press If the channel has no teletext information, it will [OK] key to play the highlighted channel. show “No Teletext Data” on the screen. 4 Press [Page Up/Down] key to page up and page down. -
Page 12: Menu
Basic Operations 5.19 Menu Press [MENU] key can open the menu, exit the current menu to last menu or close the window. 5.20 Exit Press [EXIT] key can exit the current menu to last menu or close the window. -
Page 13: Edit Channel
New Features 6.Edit Channel When you press[Menu]key to enter menu, there will display the picture like below: You can move highlight by press[Channel Up/Channel Down]key to preview the current highlighted program in the right side preview Press[Left/Right]key to select menu pages window. -
Page 14: Skip
New Features Press [Menu] key to close “Group” list. When exit the menu, it will ask you whether to 6.1.2 Skip save the change. Select “Yes” to save the change. 6.1.3.2 Create If you press[Green] key, it will display create window like below: In “TV Channel Manager”... -
Page 15: Sort
New Features When exit the menu, it will ask you whether to save the change. Select “Yes” to save the change. 6.1.4 Sort 1 On the “Name” item, press[OK]key can display keypad to edit the name of selected channel. 2 On the “Video PID”, “Audio PID” and “PCR PID”... -
Page 16: Favorite
New Features press[OK]key to input the selected symbol 6.1.5 Favorite or letter into the dialogue. After input each character, the program list on the left will search the channel according your input, and list the matched channel. Move highlight to “OK” and press [OK] key can close “Find”... - Page 17 New Features ? Frequently Asked Question Q: IF I incautiously delete all channels, what should I do? A: there are two ways to restore: To re-search all channels in “Installation” function. Use “Default Value” function to restore all channels in “Tools” function.
-
Page 18: Installation
New Features 7.2 Quick Search 7 Installation When you enter to “Installation” menu, there will display the screen like below: In this menu, you can Search channels manually by input some parameters. 7.3 Conax CA Setting 7.1 Auto Search Press OK button to enter the Auto scan menu, there will display the screen like below: We provide one CA slot for user to use. - Page 19 New Features Note: All information showed in this menu and submenu are coming from inserted card. In case if anything is wrong, it could be card problem. After inserting the card correctly at any time, a message-box will show on the screen with message about detecting the card, in "card info"...
-
Page 20: Language
New Features Spanish, Polish, Russian, Arabic, Ukraine, 8. System Setup Persian, Romanian, Hungarian, Kurdish When you enter to “System Setup” menu, you and Italian. will see the screen like below: First Audio: Some channels have more than one audio language for choosing; by this function you can set the first audio for this channel. -
Page 21: Local Time Setting
New Features Press [Exit] key to draw back from “TV System” menu. 8.3 Local Time Setting When you enter to “Local Time Setting” menu, you will see the screen like below: Display Mode is use for switching the screen-displaying mode. Now we provide below options: Auto / PAL-M / PAL-N / NTSC . -
Page 22: Timer
New Features Press [Exit]key to draw back from “Local Wakeup Date: use number keys to input Time Setting” menu. your wakeup date. On Time: use number keys to input your 8.4 Timer wakeup time. Once the time’s up, no matter what the system is in standby Press [enter] key to open timer menu. -
Page 23: Startup Channel
New Features The message will always display on the 8.6 Channel Play type screen, you can press [Exit] key to close it. Press [Exit]key to exit the current menu. 8.5 Startup Channel Press [OK] key to enter “Startup Channel” menu, and you will see the screen like below: Press [OK] key to enter “Channel Play Type”... -
Page 24: Parental Lock
New Features “On”. If this function is “Off”, there won’t show up subtitle information even if the current channel has subtitle information. OSD Timeout: When you switch channels in full screen, there will show up some information about current channel on the lower of the screen. -
Page 25: Tools
New Features 9.2 Factory Setting 9 Tools When you enter to “Tools” menu, you will see a screen like below: When you press [OK] key In the “Factory Setting” item: In “Tools” menu: There will pop a dialogue for you to enter Press [Channel Up/Channel Down] key to the password, and the default password is select menu items among Information,... -
Page 26: Software Upgrade
New Features 9.3 Software Upgrade 9.3.2 OTA This function can upgrade the software through signal lines from the cable. 9.3.1 Upgrade by RS232: 1 Input the frequency, symbol rate value and download PID, and select scan mode. 2 Then move the highlight to the start button and press [OK] key to begin to upgrade. -
Page 27: Tetris
New Features Game Moving highlight to[Cancel]keys and press [OK]key to draw back from the game. Start on the game: [Volume Up/Volume Down/Channel UP/Channel Down] use these arrow keys to guide the snake. [OK] Pause/Play game [Exit] Quit game and draw back to “Game”... -
Page 28: Trouble Shooting
Trouble Shooting 10 Trouble Shooting If you suspect there is a fault with your receiver, please check the following trouble shooting guide before calling authorized service agent. Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric shock and will invalidate your warranty. -
Page 29: Specifications
Specifications Specifications 11.1 General System standard Fully MPEGII/DVB Compliant Channel Storage Max.4000 TV and Radio Channels Frequency Range 47-862MHZ Signal Level -2dbmv to +20dbmv Bandwidth 8MHz Demodulation Constellations 8,16,32,64,128,256 Input Symbol Rate 1.5~7 Ms/s 11.2 A/V Mode Video format MPEG-II Main profile/Main level Audio format MPEG-II layer I&II Aspect Ratio...
Need help?
Do you have a question about the CSD-300-M and is the answer not in the manual?
Questions and answers