Advertisement
Upon receipt of equipment inspect for damage. Any damaged parts should
be reported to H&K Ltd within 24 hours of receiving the unit.
Remove all paper from the equipment.
Wipe clean with a damp cloth using a mild soap and water mixture
Electrical supply: 230V single phase, 50 Hz, single phase, 13Amp
Temperature settings on the controller have been factory pre-set and should
not require adjustment.
Once the unit has been positioned:
1. Ensure the water drain valves are in the off position.
2. Position product divider into the unit.
3. Fill each well water pan with warm water to the level required.
Note: Only one well is required when cooking up to 6 litres of soup
Issue 1:2 06.05.03
Installation
Operation
Water levels
1 bag of soup
2 bags of soup
3 bags of soup
6
Advertisement
