Page 1
Install and Setup VistaCam 1101 This guide will teach you how to: • Mount and install your Vistacam 1101 camera • Setup your Vistacam 1101 wirelessly...
Page 2
6. Connect the other end of the ethernet cable to the wireless PoE AC adapter. Plug the PoE adapter into a power outlet within 3 feet of your Vera controller. On the PoE adapter, the green power LED light will be solid green and the bottom network LED will be turned off 7.
Page 3
Note: Please ensure that the camera is paired to your network before permanent mounting. The PoE power adapter is for indoor use ONLY. It is not weatherized for outdoor placement. Wireless Setup Camera Side 1. Press and hold the WPS button on the wireless PoE adapter 2 seconds or until the bottom LED starts flashing.
Page 4
Vera side Follow the directions for the type of Vera controller that you have: VeraEdge 1. Press the WPS button for at least 5 seconds VeraPlus & VeraSecure 1. Press and hold the Select button until the Wi-Fi LED blinks 2.
Need help?
Do you have a question about the VistaCam 1101 and is the answer not in the manual?
Questions and answers