Advertisement
A.Loading staples:
4.7.
instructions for use
4.7.1.
Prior to operation make sure your battery pack is fully charged.
4.7.2.
Check whether the fasteners are placed in the magazine correctly.
4.8.
nailing or stapling
4.8.1.
Hold handle firmly with magazine flat to work piece forming a 90° Angle.
4.8.2.
Two modes of firing: Single Firing and Contact Firing.
4.9.
single firing mode:
4.9.1.
Push the drive shift (single/contact firing knob) to left side, it is on Single Firing mode. Single Firing is good for precision placement.
4.9.2.
Push the drive shift to left side.
4.9.3.
depress the safety contact pin against the work piece.
4.9.4.
Squeeze the trigger to fire the staple or nail ; Released the trigger and safety contact pin after firing.
© Jack Sealey limited
B. Loading nails:
Original Language Version
CPNG18.V2
Issue 1 19/11/18
Advertisement
