Table of Contents
Advertisement
Before washing for the first time
Wash once without any laundry
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
**If the
display panel, the childproof lock
Programme selector
is active
Additional functions, the options
button and spin speeds
All buttons are sensitive and need
only to be touched lightly. Press
and hold the options and spin
speed buttons to run through the
setting options automatically.
displays:
ng, rinsing, spinning
page 9.
page 7.
page 6.
Measure accordingly:
1
symbol flashes in the
deactivate, page 5.
Individual settings, page 5.
nicio/Pausa + Carga
I
2
(Start/Reload)
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
Washing
Detergent drawer with
compartments I, II,
Drum
Control panel
Washing machine
door
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If
(without final spin) is active: Turn the programme
selector to
(Drain) or select the spin speed.
Press Inicio/Pausa + Carga (Start/Reload).
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models
instructions.
Switching off
Turn the programme selector to Stop (Off).
End of programme when ...
... Inicio/Pausa + Carga (Start/Reload) flashes and -0-
appears on the display panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select
(Rinse)/ Centrifug. (Spin).
– Press Inicio/Pausa + Carga (Start/Reload).
3
Programmes at lower temperatures:
–
(Rinse)/ Centrifug. (Spin) (deactivate Skin Care
button) or select
(Drain).
– Press Inicio/Pausa + Carga (Start/Reload).
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press Inicio/Pausa + Carga (Start/Reload). The new
programme starts from the beginning.
Reloading laundry, if ...
... Inicio/Pausa + Carga (Start/Reload) selected and then
YES is lit in the display panel. If NO is lit, the washing
machine door cannot be opened.
– Press Inicio/Pausa + Carga (Start/Reload).
Refer to installation
page 5
4
Advertisement
Table of Contents
