Step-By-Step Installation - Samsung RB3VTS Series User Manual

Hide thumbs Also See for RB3VTS Series:
Table of Contents

Advertisement

Step-by-step installation

STEP 1 Select a site
Site requirements:
• Solid, level surface without carpeting or flooring that may obstruct ventilation
• Away from direct sunlight
• Adequate room for opening and closing the door
• Away from a heat source
• Room for maintenance and servicing
• Temperature range: between 10 °C and 43 °C
Effective temperature range
The refrigerator is designed to operate normally in the temperature range specified by
its class rating.
Climate Class
Extended Temperate
Temperate
Subtropical
Tropical
NOTE
The cooling performence and power consumption of the refrigerator may be affected
by the ambient temperature,the door-openning frequency,and the location of the
refrigerator. We recommend adjusting the temperature settins as appropriate.
• Install the two plastic distance guides (the parts on the black vanes
-condenser- at the rear) by turning it 90° (as shown in the figure) to
prevent the condenser from touching the wall.
• The distance between the appliance and back wall must be a
maximum of 75 mm.
Symbol
IEC 62552 (ISO 15502)
SN
Between +10 and +32
N
Between +16 and +32
ST
Between +16 and +38
T
Between +16 and +43
Ambient Temperature (
+10 and +32
+16 and +32
+18 and +38
+18 and +43
C)
o
ISO 8561
English 29

Advertisement

Table of Contents
loading

Table of Contents