Table of Contents
Advertisement
Quick Links
Quick Installation Guide
Moxa Americas:
Toll-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa Europe:
Tel:
+49-89-3 70 03 99-0
Fax:
+49-89-3 70 03 99-99
Moxa India:
Tel:
+91-80-4172-9088
Fax:
+91-80-4132-1045
MD-215 Series
Edition 1.0, October 2016
Technical Support Contact Information
www.moxa.com/support
2016 Moxa Inc. All rights reserved.
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel:
+86-21-5258-9955
Fax:
+86-21-5258-5505
Moxa Asia-Pacific:
Tel:
+886-2-8919-1230
Fax:
+886-2-8919-1231
P/N: 1802002150010
*1802002150010*
Advertisement
Table of Contents
Related Manuals for Moxa Technologies MD-215 Series
Summary of Contents for Moxa Technologies MD-215 Series
- Page 1 MD-215 Series Quick Installation Guide Edition 1.0, October 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific: Tel: +49-89-3 70 03 99-0...
- Page 2 The MD-215 series displays are designed with a wide -40 to 70°C temperature range, making them some of the most reliable industrial platforms available for harsh, hot, indoor/outdoor environments.
- Page 3 Hardware Installation Appearance SavvyTouch Display Control Buttons The SavvyTouch display controls are located on the front panel of the MD-215. These intelligent controls light up in response to a simple wave of the hand over the area of the screen where they are located. The following table describes the function of each SavvyTouch display control button: Display...
- Page 4 Display Name Control Function/ Color Legend Color AC/DC power functioning normally. INFO AC/DC power error. Switch between DAY/DUSK/NIGHT White brightness modes. Display mode Panel brightness outside the default range. Installing the MD-215 Panel Mounting The MD-215 comes with 8 optional clamp mounts for installation on a panel (where space has been cut out to accommodate the rest of the hardware) or into computing stations where a flush mount is required.
- Page 5 An additional four screws (not included in the kit) are required to mount the display on a VESA rack. Use M6 screws with a length between 10 and 12 mm for this purpose. Connector Description Extending the Display The MD-215 is provided with both standard VGA and DVI-D interfaces on the bottom panel.
- Page 6 Powering On/Off the MD-215 To power on the MD-215, connect the MD-215 to an AC power source, a DC power source, or both. Touch the Menu/power button for 1 second to turn on the display. Touch the Menu/power button for 4 seconds to turn off the display. NOTE If only one power input is connected, the Info button will turn red.
Need help?
Do you have a question about the MD-215 Series and is the answer not in the manual?
Questions and answers