SYSTEMS Power Lift User Manual

MAINTENANCE
Your Power Lift stand is designed to be durable and can handle
various types of climates and terrains. Wherever you bring your
motorcycle you can count on the Power Lift stand to raise it up.
Following these steps will ensure your stands longevity and
reliability.
Use basic cleaning supplies to remove dirt and dust from the exterior of the Power Lift.
Lubricating the lifting pad bushings:
Your Power Lift stand has 4 self-lubricating Teflon bushings installed inside the frame
tubes. Over time, subjection to dust may cause the bushings to become dry or make
noise. Use of a dry lubricant such as Teflon or silicone spray may be used to help
re-lubricate the bushings.
Do not use oil based lubricants such as WD-40, as this will only attract more dust
and may cause premature bushing wear.
WARRANTY
SYSTEMS POWER LIFT WARRANTY DISCLAIMER
Your newly purchased Power Lift comes with a limited one year warranty.
This Limited Warranty covers any defects in material or workmanship under normal use
during the warrant period. (Excludes vinyl graphic)
During the warranty period, Systems LLC, will repair or replace, at no charge, products
or parts of a product that proves defective because of improper material or
Workmanship, under normal use and maintenance.
SYSTEMS POWER LIFT COPYRIGHT
Information and views expressed in this document, including URL and other website
references, may change without notice. This document does not provide you with any
legal rights to any intellectual property in any Systems product. You may copy and use
this document for your internal, reference purposes.
© 2015 Systems LLC. All rights reserved. Systems and Power Lift are trademarks of
Systems LLC.
24715 Ave Rockefeller, Valencia, CA 91355
661.294.**** www.powerliftsystem.com
USER MANUAL