Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Celikel CHARGER V Series
- Page 1 CELIKEL CHARGER V OPERTORS INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ..........................Using This Manual ........................CERTIFICATE OF WARRANTY ......................Model and Serial Number Information ..................SAFETY ............................. PRODUCT TECHNICAL FEATURES ..................... DELIVERY AND TRANSPORTATION ....................ATTACHING TO THE TRACTOR ......................ADJUSTMENT THE LENGHT OF SHAFT ..................... HYDRAULIC ............................ -
Page 3: Using This Manual
Dear User; Congratulations for purchasing a Celikel Charger V. We appreciate your business. You have purchased one of the best built, most reliable mixers available. Please read this user's and operational manual carefully in order to prevent any possible malfunctions and to know more closely before use your machine. -
Page 4: Certificate Of Warranty
CERTIFICATE OF WARRANTY Warranty conditions 1. The warranty period for the product from the date of delivery to the user 1 (one) year. 2. Except for showing deformation depending on the usage and designated as parts supplies are under the warranty of our company. 3. - Page 5 15. Responsible is belong to dealers, agents or representatives of the manufacturer for filling in the warranty document. 16. Purchased products are out of warranty in all kinds of changes to the warranty certificate. Çelikel Tarım Makineleri San. ve Tic. Ltd. Şti 3.
-
Page 6: Model And Serial Number Information
MODEL AND SERIAL NUMBER INFORMATION The serial number tag is located on the front lower panel. -
Page 7: Safety
SAFETY Failure to follow instructions and safety precautions in this manual and in the safety decals could result in severe injury or death. Any person who will be operating or maintaining this mixer should first read and understand this manual and all safety warnings on the unit. This instruction manual should always be available to those responsible for the operation and maintenance of this mixer. - Page 8 Always fire extinguisher should be kept on the tractor. The tractor must always be taken first aid kit. Keep riders off. Riders are subject to injury such as being struck by foreign objects and being thrown off. Riders also obstruct the operator’s view resulting in the machine being operated in an unsafe manner.
- Page 9 Do not start the machine when someone around the tractor. Please try to be safe from tractor and machine as much as possible when they are about to work and have worked. It is the responsibility of the customer to know the lighting and marking requirements of the local highway authorities and to install and maintain the equipment to provide compliance with the regulations.
- Page 10 Avoid approaching any object while the machine is in motion. Please wait until to intervene the machine completely immobile position. Stay clear of sharp blade. Do not operate mixer/feeder without safety shields in place. Rotating parts can crush or dismember causing personal injury or death. Disconnect PTO driveline before removing shields for adjustment or service.
- Page 11 After you're done with machine all hydraulic mechanisms to return to their former positions to runs again. Do not behind the wheel of the tractor and the machine. Keep it away from children around the moving machine parts. Stay clear of overhead power lines electrocution can occur without direct contact.
- Page 12 Use of personal safety equipment Please use the original spare parts which have manufactured in our company. Technical failures and similar situations may call to our service for 7/24h. Contact: +90 (332) 345 15 02 +90 444 49 42...
-
Page 13: Delivery And Transportation
DELIVERY AND TRANSPORTATION Load your machine with a loading vehicle with sufficient lifting capacity. Make sure that rope and chain have to sufficient capacity will be used in the loading. WARNING: See the specifications to find out the weight of your machine. Always make load using the attachment points on the machine. -
Page 14: Adjustment The Lenght Of Shaft
FOR TRAILER TYPE MODELS WARNING: Make sure the no one area around the tractor and machine Run the tractor and moving back to machine’s drawbar. Gently pull the drawbar to connect machine to tractor. Switch off the tractor and check the drawbar of machine. Make the propeller shaft connection. - Page 15 The propeller shaft is divided into two parts. The propeller shaft is secured with a clamp device help. Determined surplus should be cut.
-
Page 16: Hydraulic
The excess portion of the propeller shaft can cut in two sides. The propeller shaft parts are combined again removed from the vise. Please make the attaching chain connection to propeller shaft. Slip portion of the propeller shaft (large side) would be attached to the machine and other side would be attached to the tractor. -
Page 17: Brakes
The maximum pressure in the hydraulic system is 210 bar. Note also the maximum pressure difference in the cross conveyor hydraulic engine, which means the difference in absolute pressure between input and output must not exceed 185 bar. Practically, the cross conveyor input must be shut down immediately if there is an obstacle that tends to stop it from running. - Page 18 1. Be sure to turn off the machine's conveyor door. 2. To run the machine use 540 RPM of PTO (Electric motors on some models) starting to feed to loading. Make sure that your machine is working in a flawless manner. 3.
-
Page 19: Weighing System (Optional)
WEIGHING SYSTEM (Optional) If weighing system is available on your machine, Please check the weighing system in addition to the instruction manual provided with this guide. ADJUSTMENT OF COUNTER BLADES Usage of counter blades is recommended when mixing and chopping lightweight substance. While performing ordinary mixing, counter blades are not necessary. -
Page 20: Maintenance
UYARI: Karışımı tamamlanmış olan yem dağıtılmaya başlamadan önce makine sabit bıçaklarını en dış konuma alınız. Aksi takdirde uzun süren yem dağıtımlarında yem istenilenden daha fazla parçalanabilir. Uygun homojenliğe ulaşmış olan yem karışımını dağıtmak için makine çalışır vaziyette iken konveyör bandı çalıştırınız.* Boşaltma kapağını... -
Page 21: Conveyor (Optional)
Gearbox SAE 140 1000 hours / yearly Hydraulic ISO VG 46 Yearly Greasing Grease Weekly CONVEYOR (Optional) Conveyor Tension Adjustment The machine is fitted with discharge band made all the settings on the machine. If you need to belt tension adjustment for any reason, please follow the steps below. 1) Loosen the bolts that secure the tape shaft bearings at right and left sides of the band. -
Page 22: Possible Problems And Solutions
Some models are equipped with flow control valve for changing the conveyor speed. Use the adjustment mechanism shown in the figure to decrease or increase the conveyor speed. WARNING: If you will completely close the control valve, conveyor will not work and it will lead to failure in hydraulic system. - Page 23 -No oil in the - Check the oil level. hydraulic system. - Check hydraulic connections and hoses. - Oil leak in hydraulic system - Check the electrical wiring and the command. Discharge - Command is conveyor and defective - Change the hydraulic pump. back loader are not working.
- Page 24 - Discharge - Check that the cover screw connections connections loosen. Discharge - Change the discharge conveyor. conveyor is not closing or come - Cover arc more away.