Advertisement
I
I
CAUTION:Please pair the cameras before installation
if you purchased extra wireless cameras!
Normally you do not need to pair the camera and monitor,what you need
to do are as follows:
1.Find out the installation place of the camera and the power of reversing light(or ACC).
2.Install the monitor to a suitable place and connect it to the cigarette lighter.
N
S
T
A
L
L
N
S
T
A
L
L
A
T
I
O
N M
A
T
I
O
N M
Customer Support:
Email:support@camons.cn
Phone: 86-013798241290
Facebook Messenger:Camons.fans
A
N
U
A
L
A
N
U
A
L
Advertisement
Table of Contents
Summary of Contents for CAMONS T-DW7150R
- Page 1 1.Find out the installation place of the camera and the power of reversing light(or ACC). 2.Install the monitor to a suitable place and connect it to the cigarette lighter. Customer Support: Email:support@camons.cn Phone: 86-013798241290 Facebook Messenger:Camons.fans...
- Page 2 How to pair? Connecting the monitor and camera with DC12V-24V power supply. The camera was paired default in CAM1 Channel. If you want to switch to CAM2, first press the “CAM ”button on the display, choose CAM2 channel, Press “M” button to select "PAIRING", then press “REC” to enter the "paring mode". Short pressing the camera's paring key to start.
- Page 3 Wire connection: CAM1 Trigger wire Cigarette lighter CAM2 Trigger wire CAM3 Trigger wire CAM4 Trigger wire DC12-24V 1.Green wire Trigger1 2.Blue wire Trigger2 3.Brown wire Trigger3 CAM1 CAM2 CAM3 CAM4 4.Gray wire Trigger4...
- Page 4 Trigger function descriptions: ① ② ③ ④ Camera installation: 1. Drill the hole in the proper position of the vehicle. 2. After fixing the bracket, lead the camera wire through the cable hole and seal the hole with grommet and sealant. 3.
- Page 5 Wireless side camera Adjust the camera’s angle (2 screws) Antenna Pairing Button DC12-24V (RED) Drill holes to mount the GND (BLACK) camera’s base at suitable Unscrew the outter housing place (4 screws) (3 screws) 1. Connecting the backup camera with the power supply of the reversing light (or ACC). 2.
- Page 6 Wireless L icense Plate Camera Horizontal 115° Antenna GND (BLACK) DC12-24V (RED) Pairing Button STAND BRACKET INSTALLATION Install above the license plate Install under the license plate 3M GLUE BRACKET INSTALLATION Install under the license plate Install above the license plate...
Need help?
Do you have a question about the T-DW7150R and is the answer not in the manual?
Questions and answers