Manual Settings - Hama Black Line Operating Instructions Manual

• Press and hold the - button (G) again for approx. 3 seconds to stop the manual
search for the DCF radio signal.
Note - Summer time
The clock automatically switches to summer time
as summer time is activated.
Note – Time zone
• The DCF signal can be received over long distances, but always transmits the
current Central European Time in Germany. Make sure you set the time difference
in countries with another time zone.
• If you are in Moscow, for example, the time is 3 hours later than in Germany. This
means that you should set +3 for the time zone. The clock then automatically
sets the time to 3 hours ahead after receiving the DCF signal or according to the
manually set time.

Manual settings

• Press and hold the - button (G) for approximately 3 seconds to stop the search for
the DCF signal. The radio symbol (17) goes out and you can set the time manually.
• Press and hold the Mode button (E) for approximately 3 seconds to make the
following settings one after the other:
Year, month, day, hour, minute, 24-h/12-h format, time zone (+/- 12) and language
• To select the individual values, press the + button (F) or the - button (G), and
con rm each selection by pressing the Mode button (E).
• Press the MODE button (E) immediately to adopt the set value displayed and skip
ahead.
• If you do not make an entry for 20 seconds, you automatically exit Settings mode.
Note – Day of the week
• You can choose from German (GE), English (EN), Danish (DA), Dutch (DU),
French (FR), Italian (IT) and Spanish (SP) for the day of the week display.
6
appears on the display as long
S