West Marine 13411285 Instruction Booklet And Care Manual

4: Time Mode
This watch has dual time T1 & T2 (two time zones) and 12 or 24 hour timekeeping
displays. Be sure to correctly configure the current time, date and local data before
using the functions of the watch. The Time Mode display shows current time (hours,
minutes, seconds), calendar (month, day & date), moon phase & tide.
To set the time and other data:
• From Time Mode, Press Button S2 to move between time zones (T1 or T2).
• Press and Hold Button S4 enter Setting Display. "OF" will flash.
• Press Button S1 (increase) or S2 (decrease) to adjust & set flashing item (press and
hold to advance rapidly)
• Push button S3 to confirm the setting and move to the next adjustment as per the
menu below:
1. Select Nightlight "Night Off" (only S4
activates EL Backlight) or "Night On"
(Moon& star icon will be displayed and
any key pressed will activate the EL backlight
for 3 seconds)
2. 12 or 24 hour display format (if using 12 hour
format, "P" will show on the display for PM.
• Push Button S4 when setting is complete. If no button is pushed for 1 minute, the
watch will automatically exit to Time Mode.
• A Second Time Zone (T2) is available and optional - it is not necessary to set it up in
order to have the timepiece function properly.
• In Time Mode (T1), press S2 to toggle to T2.
• Press & Hold S3 to enter setting display.
• Enter the hour time difference for the second time zone.
5: Alarm Mode
The watch has one daily alarm and an Hourly Chime
• From Time Mode, Press Button S3 to enter Alarm Mode
• Press Button S1 to enable/disable the Alarm (
• Press Button S3 to enable/disable the Hourly Chime (
right)
• From Alarm Mode, Press & Hold the S4 Button (about 2 seconds) to enter Alarm
Setting Mode
• Press S3 to select Time of Daily Alarm: Hours or Minutes to be set
• Press Button S1 (increase) or S2 (decrease) to adjust & set flashing item (press and
hold to advance rapidly)
• Push Button S4 when setting is complete. If no button is pushed for 1 minute, the
watch will automatically exit to Alarm Mode. If no button is pressed for another
minute, the watch will exit to Time Mode.
6: Chronograph Mode
This watch is equipped with a chronograph to keep track of elapsed time and
individual lap times (30 lap memory).
• From Time Mode, press button S3 3 times to enter Chronograph Mode "CHRON"
• If display is not reset, press Button S2 to reset and clear data.
• Press Button S1 to start and stop the timer. The "STW" Icon will flash on the
screen whenever the chronograph is running.
• Press Button S2 to record lap time. Press S2 for each new lap. Lap number will
appear at the Bottom of the display. When S2 is pressed, the Lap time appears
briefly and then the display returns to total elapsed time. The watch will record
and recall 30 laps.
• Press S1 to stop the Chronograph.
• Press S4 for to enter Memory Recall Mode. Press S1 to view each lap record.
3. Adjust Hours
Press S2 to view previous Lap.
4. Adjust Minutes
• Press S3 or S4 to move to Timer Mode.
5. Adjust Seconds
• To clear, press and hold S2 until Chronograph is reset to zero.
6. Adjust Year (2 digits)
7. Adjust Month
7: Timer Mode
8. Adjust Day
The Timer Mode provides 3 Count Down Timer functions:
1. Single Count Down [CD-STP]. Timer Stops automatically when it
reaches "0"
2. Count Down and Then Count Up [CD-UP]. Watch counts down and then
counts back up. At "0", watch beeps for 30 seconds. Press S1 to stop
Count-Up.
3. Count Down Repetitive [REP-00]. When the watch reaches "0", it
automatically resets and repeats the countdown again. Watch Beeps for 30
seconds (not automatic stop)
• From TIME Mode, Press Button S3 three times to enter Timer Mode.
• Press Button S1 to start and stop the timer. The "TMR" Icon will flash on the
screen whenever the timer is running. Press S1 to stop the timer.
Icon will appear in upper right)
• Press & Hold Button S4 to enter Timer Setting Mode. Hours will flash.
Icon will appear in upper
• Press Button S3 to move thru the setting menu. Press S1 to increase or S2 to
decrease the setting followed by S3 to confirm and move to the next setting:
• Hours
• Minutes
• Seconds
• Timer Function: [CD-STP, REP-00 or CD-UP]
• Timer can be set to count up to 23 hours, 59 minutes, 59 seconds
• Push Button S4 when setting is complete. If no button is pushed for 1 minute, the
watch will automatically exit to Time Mode
T
ide
W
aTch
Instruction Booklet and Care Guide
Tide Watch #13411285
1-800-262-8464
wmCustomerService@westmarine.com
P.O. Box 50070
Watsonville, CA 95077-0070