Gigaset C575 Manual page 11

Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤
Press the centre of the control key
¤
Press the keys
language settings display appears, the set language
(e. g. English) is highlighted (
¤
To select a different language:
the desired language is highlighted on the display,
e. g. Francais press the key on the right directly underneath
the display to activate the language.
¤
To revert to idle status:
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls and to
enable the alarm to be used.
¤
Press the display key Time
or, if the date and time have already been set:
¤
. . . use
OK
The active cursor position flashes
with . . . switch between cursor positions with
Enter date:
¤
. . . using enter the day, month and year in 8-digit format.
Enter time:
¤
. . . using enter hours and minutes in 4-digit format.
Save settings:
¤
Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
¤
Press and hold the End call key
The telephone is now ready for use.
.
and slowly and successively . . . the
= selected).
Press the control key
Press and hold the End call key
to select Settings
. . . change cursor position
until
OK Date/Time
Handset
Example
Deutsch
English
Francais
Calls Time
Date/Time
Date:
15.08.2020
Time:
00:00
Back Save
11