Table of Contents
Related Manuals for Qtx MIXCAB-15
Summary of Contents for Qtx MIXCAB-15
- Page 1 MIXCAB-15 15” Portable Mixer PA MIXCAB-15: 178.971UK XCAB-15 15” Extension Cabinet XCAB-15: 178.972UK VERSION 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
-
Page 2: Package Contents
Introduction Thank you for choosing a MIXCAB-15 portable PA unit. This versatile portable PA unit offers a full set of PA features in a rugged and portable enclosure. Operated as a standalone unit or with the passive XCAB-15, this portable PA delivers an output power normally only possible from mains powered speakers and has inputs for multiple performers as a band PA system. - Page 3 Connect the MIXCAB-15 unit to the mains (27) using the appropriate mains IEC lead supplied. You may otherwise opt to connect the DC input at the rear (14) to an external 12-15Vdc supply (e.g car battery) or use the internal battery if charged.
-
Page 4: Operation
(i.e. 12-o-clock position). Also turn down all ECHO controls to begin with (13, 19) If the MIXCAB-15 is to be used on its own without connecting an XCAB-15 extension speaker, it is best to operate the unit in mono to avoid losing one side of the stereo mix. Slide the mono/stereo switch (24) to the MONO position. -
Page 5: Internal Media Player
ECHO control. Internal media player The MIXCAB-15 unit has a media player for digital audio playback from USB or SD/MMC media FM tuner or via Bluetooth. The player can also be used to record audio to a USB or SD card. -
Page 6: Bluetooth Connection
Recording to USB or SD media When in USB or SD card mode, the overall mix output of the MIXCAB-15 can be recorded to a memory device that is connected to the internal media player. The memory device may be USB or SD card (whichever is inserted first). - Page 7 Media player remote control In addition to the MIXCAB-15 rear panel media player controls, an I.R. remote control is provided with equivalent functions and direct track number access buttons. To use the remote control, remove the plastic tab at the bottom to activate the battery.
-
Page 8: Troubleshooting
This is to protect the speaker and circuitry from a spike in power. To re-set the MIXCAB-15, switch the unit off and on again to resume power. Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.