Coopers of Stortford G609 Instructions For Use

Open Toe Foot Heat Massager
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED:

READ ALL INSTRUCTIONS BEFORE USE.

THE PRODUCT SHOULD NEVER BE LEFT UNATTENDED WHEN PLUGGED IN. UNPLUG FROM OUTLET
WHEN IT IS NOT IN USE AND BEFORE PUTTING ON OR TAKING OFF PARTS.

DO NOT OPERATE UNDER A BLANKET OR A PILLOW. EXCESSIVE HEATING CAN OCCUR AND CAUSE FIRE,
ELECTRIC SHOCK OR INJURY TO PERSONS.

NEVER OPERATE THE PRODUCT WITH THE AIR OPENINGS BLOCKED. KEEP THE AIR OPENINGS FREE OF
LINT, HAIR, ETC.

DO NOT DROP OR INSERT ANY OBJECTS INTO ANY OPENING.

DO NOT USE OUTDOORS.

DO NOT OPERATE WHERE AEROSOL (SPRAY) PRODUCTS ARE BEING USED OR WHERE OXYGEN IS
ADMINISTERED.

TO DISCONNECT, SWITCH OFF ALL CONTROLS AND REMOVE PLUG FROM SOCKET.

THE APPLIANCES HAS A HEATED SURFACE. PERSONS INSENSITIVE TO HEAT MUST BE CAREFUL WHEN
USING THE APPLIANCE.

THE APPLIANCE IS ONLY TO BE USED WITH THE POWER SUPPLY UNIT PROVIDED WITH THE APPLIANCE.

TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE CORD, PLUG OR APPLIANCE, IN WATER OR
ANY OTHER LIQUID.

UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.

DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED CORD OR PLUG OR AFTER THE APPLIANCE
MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY MANNER. WE RECOMMEND THAT THE POWER CORD
IS NOT KINKED OR STORED IN A TWISTED MANNER, AND THAT YOU REGULARLY CHECK ITS CONDITION.

THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF STORTFORD MAY
CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.

DO NOT LET CORD HANG OVER THE EDGE OF A TABLE OR COUNTER, OR TOUCH HOT SURFACES.

DO NOT PLACE ON OR NEAR HEAT SOURCES.

USE ON A LEVEL, STABLE SURFACE.
Instructions for Use
G609
Technical details
Rated voltage: 12VDC, 2.5A
Rated power: 30W
DC 24V is not allowed
v001: 23/03/20