Table of contents Table of contents General information..........................4 1.1 Further information........................... 5 1.2 Notational conventions........................6 1.3 Symbols and signal words....................... 7 Safety instructions............................. 9 Features............................... 15 Installation and starting up........................ 16 Connections and controls........................18 Cleaning............................... 22 Technical specifications........................23 Protecting the environment......................
Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. network switch...
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Use the search function in the electronic version to find the topics of Keyword search interest for you quickly.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’...
General information Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: Switch on the device. Press [Auto]. ð Automatic operation is started. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
Page 8
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. NOTICE! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided.
Safety instructions Safety instructions Intended use This device is used to connect terminal devices to each other to form a local area network or to connect to the Internet. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage.
Page 10
Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit.
Page 11
Safety instructions DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis‐ tered electrician.
Page 12
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user.
Page 13
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’...
Page 14
Safety instructions NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet.
Features Features 19" gigabit network switch with PoE+, unmanaged 16 × 10/100/1000BASE-T Gigabit Ethernet Port – 8 × lockable RJ-4 port – 8 × RJ-45 port with PoE+ (max. 15 W) Auto MDI/MDIX Flow Control Auto-negotiation Lockable Power Twist in and output Supports the IEEE standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3x 19"...
Installation and starting up Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Page 17
Installation and starting up Turn on the network switch using the main switch. ð Die [POWER] LED lights up red. The [LINK/ACT] and [1000M] LEDs briefly light up green as a self-test. Stage Switch POE...
Connections and controls Connections and controls Front panel network switch...
Page 19
Connections and controls 1 Main switch. Turns the device on and off. 2 Indicator LED. Lights up red when the device is connected to the power supply and turned on. 3 Network and transmission status LED for each port [LINK/ACT] [1]…[16] Lights up green: Establishing connection with an terminal device Flashes green: Data transmission active [1000M] [1]…[16]...
Page 20
Connections and controls Rear panel network switch...
Page 21
Connections and controls 6 [9]…[16] RJ-45 port with PoE+ function 7 [POWER OUT] Lockable output socket (Power Twist) for powering a connected device. 8 [POWER IN] Lockable input socket (Power Twist) for connection to the power supply. Stage Switch POE...
Cleaning Cleaning Clean the unit with a dry, soft, lint-free cloth. Stubborn dirt can be removed with a slightly dampened cloth. Never use cleaners containing alcohol or thinner. network switch...
Technical specifications Technical specifications Compatible IEEE standards IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3x Input connections Voltage supply Lockable input socket (Power Twist) Network interfaces for con‐ 8 × lockable RJ-45 port necting external devices 10/100/1000 Mbps Auto-negotiation 8 × RJ-45 port with PoE+ function 10/100/1000 Mbps Auto-negotiation Output connections...
Page 24
Technical specifications Transmission mode Store-and-forward Number of possible MAC addresses 8000 auto-learning Operating supply voltage 100 – 240 V 50/60 Hz Mounting properties 19 inch, 1 RU Dimensions (W × H × D) 170 mm × 43 mm × 440 mm Weight 2.15 kg Ambient conditions...
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Need help?
Do you have a question about the Swissonic Stage Switch POE and is the answer not in the manual?
Questions and answers