Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kirby Morgan PIONEER
Summary of Contents for Kirby Morgan PIONEER
- Page 1 PIONEER THE INNOVATION CONTINUES INSTRUCTIONS AND WARRANTY...
- Page 2 OVERVIEW Hour hand Minute hand Seconds hand THE INNOVATION CONTINUES Date window Unidirectional rotatable PIONEER DIVER’S 1000 m graduated bezel in ceramic Winding crown Automatic helium release...
- Page 3 40 hours without wear. Unscrew the crown counter- THE INNOVATION CONTINUES clockwise until it spins freely. Advance the crown clockwise PIONEER DIVER’S 1000 m 20–30 times. Push the crown back into the case, turning it clockwise while applying pressure towards the...
-
Page 4: Setting The Date
(position 1). Turn the crown clockwise to THE INNOVATION CONTINUES advance the date (position 1). Push the crown back into PIONEER DIVER’S 1000 m the case. Turn the crown clockwise while applying pressure towards the case, until snug (position 0). -
Page 5: Setting The Time
(position THE INNOVATION CONTINUES Turn the crown clockwise (or counter-clockwise) to the appropriate time PIONEER DIVER’S 1000 m (position 2). Push the crown back into the case. Turn the crown clockwise while applying pressure towards the case, until snug (position 0). - Page 6 HOW TO REMOVE THE LINKS There are arrows on the inside links of the metal bracelet. These are the links that are removable. Notice the small holes on the edge of the metal bracelet. To remove a link you will need to push out the small “hairpin” style pins using a pin pusher or similar tool—be careful not to scratch the metal.
- Page 7 HOW TO CHANGE THE BANDS Locate the small holes and set screws at the end of the watch lugs on the crown side, this is where the band attaches to the watch. The set screw is 22.5mm long and goes from one side of the watch lugs to the other.
- Page 8 WETSUIT EXTENDER Your watch is equipped with a ratchet style wetsuit extension. This will allow you to determine the amount of extension needed with the push of a button. Locate the larger buttons—one on each side of the buckle across from each other.
-
Page 9: Caring For Your Watch
CARING FOR YOUR WATCH Your KIRBY MORGAN watch is a soapy water, rinsed clean and dried precision device, thus it requires with a soft cloth. appropriate care, both to protect your investment and to maintain If your watch is immersed in water good working order. - Page 10 tested at a static level of pressure. Avoid wearing your watch in Underwater activities create saunas and hot tubs, as the high additional pressures on the watch, temperatures can affect the watch’s which are greater than the normal or water resistance. actual depth.
- Page 11 WARRANTY AND REFUNDS KIRBY MORGAN backs our watches with a one year conditional warranty. This warranty covers defects in the build quality of the watch, including movement. This excludes the strap, and normal wear and tear. Further, the warranty does not cover...
- Page 12 ® www.KIRBYMORGAN.com...
Need help?
Do you have a question about the PIONEER and is the answer not in the manual?
Questions and answers