Advertisement
Parts
Piano
4 Toys
Mirror
2 Hubs
Mat
M3,5 x 1,3 cm Screw - 6
SHOWN ACTUAL SIZE
Tighten and loosen screws with
a Phillips screwdriver. Do not
over-tighten screws.
3
Mat, Hub and Base
Arch
• Fit a hub to a base.
Hint: The hubs are designed to fit each
base one way. If a hub does not seem to
fit, try assembling it to the other base.
• Insert three screws into the hub and
tighten.
• Repeat this process to assemble the
other base and hub.
2 Bases
• Place the mat, print side up, between
the bases.
• Fit the straps on the squared end of the
mat into the slots in the bases. Make
sure the tab on the end of each strap
forms a "T" on the other side of
the slot.
• Pull up on the mat to be sure it is
assembled to the bases.
Assembly
Hub
Base
Mat
4
Lay and Play
Assembly
• Fit the piano onto the peg on each hub
with the keys facing towards the mat.
• Tighten each hub to secure the piano
in place.
• Fit the ends of the arch into the socket
in each base farthest away from
the piano.
• Wrap the strap on the mirror around
the arch and through the mirror slot.
• Pull the strap tight and then fold
to fasten.
Advertisement
