Table of Contents
Advertisement
Quick Links
User Guide
Hotec Wireless Microphone
Model: H-U26
Thanks for purchasing Hotec UHF Wireless microphone, please read the
following instructions carefully before use.
Email: support@sz-tecson.com
Website: www.sz-hotec.com
Facebook page: https://www.facebook.com/Hotechome/
Or scan the QR code
Hotec
®
is the registered trademark of Shenzhen Tecson Trade and Technology Co., Ltd.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tecson Hotec H-U26
Summary of Contents for Tecson Hotec H-U26
- Page 1 Thanks for purchasing Hotec UHF Wireless microphone, please read the following instructions carefully before use. Email: support@sz-tecson.com Website: www.sz-hotec.com Facebook page: https://www.facebook.com/Hotechome/ Or scan the QR code Hotec ® is the registered trademark of Shenzhen Tecson Trade and Technology Co., Ltd.
-
Page 2: System Content
SYSTEM CONTENT H-U26 H-U26 Hand held microphone x 2 H-U26 Mini rechargeable Receiver x 1 Charging cable x 1 AA battery x 4 (for microphone) Microphone foam x 2 Anti-rolling ring x 2 TS to TRRS cable x 1 TS to TRS cable x 1 PRODUCT INTRODUCTION Hotec UHF wireless microphone works at 902-928MHz, total 64 frequencies for H-U26, 32 for each channel. - Page 3 ： RECHARGEABLE MINI RECEIVER Receiver for H-U26 Battery low indicator: battery is low if this indicator becomes Red, ① charge the Mini Receiver when the battery is low. When it is fully charged or has sufficient power, the battery low indicator is green. Power button: Short press this button to turn on/off the product.
-
Page 4: Connection Diagram
Hi/lo Hand held Microphone ON/FF: short press this button to power on / off the hand held microphone ① Battery level indicator: This indicator tells you how much battery is left. ② Change the battery when the battery level is low. Frequency point: this shows what frequency the hand held mic works. - Page 5 2. Use this H-U26 to record audio with your Phones Step 1: Connect the TS to TRRS cable to the mini Receiver; Step 2: Connect the TS to TRRS cable to the headphone jack of you phone. Step 3: Power on the hand held microphone and Receiver. When you see the RF indicator at the right color, you are ready to use.
-
Page 6: Product Specification
PRODUCT SPECIFICATION System spec. Modulation Mode Digital Frequency Modulate Frequency Range UHF 500~980MHz Preset Frequencies 32 for CHA & CHB respectively Frequency Response 75Hz~18kHz ± 3dB Max. Deviation Range ±50kHz (with level limiting) T.H.D. < 1.0% @ 1kHz >98dB Working Range Up to 100 feet RF Carrier Stability ±0.005% (-10 ℃... - Page 7 TROUBSHOOTING Issue Cause Solution Pair the mic and Receiver manually following the steps below 1. Turn on the hand held microphone that is not paired to the Receiver, hold and press the power button and the frequency adjustment button until the LCD display of the microphone flashes;...
- Page 8 If the mic system is not to be used for a certain period of time, please take out the battery from the hand held mic. Manufactured by Shenzhen Tecson Trade & Technology Co., Ltd. Customer service e-mail: support@sz-tecson.com...
Need help?
Do you have a question about the Hotec H-U26 and is the answer not in the manual?
Questions and answers
HOLA BUENAS , MI MICROFONO NO CONECTA NO ME DEJA PASAR DE CANAL QUEDA EN CHB