Cisco S195 Manual page 14

Rear Panel LEDs
13
15
Rear Panel LEDs
The following figure shows the rear panel LEDs of the WSA S195 and describes their states. The S395 is the
same except it has two power supplies. The S695 and S695F have the same LEDs except that these models
have more data interfaces; the speed and status LED descriptions are the same.
Figure 13: S195 and S395 Rear Panel LEDs and Their States
1
3
Overview
14
Data interface (DATA 2)
Serial console port (
RJ-45 connector that directly connects a
management computer to the appliance.
Interface link speed:
• Off—Link speed is 100 Mbps.
• Amber—Link speed is 1 Gbps.
• Green—Link speed is 10 Gbps.
Data interface link speed:
• Off—Link speed is 10 Mbps.
• Amber—Link speed is 100 Mbps.
• Green—Link speed is 1 Gbps.
14 RPC port (RPC)
Use for remote power cycling.
16 Unit identification button
2 Interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
active link.
4 Data interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
active link.
Overview