Dicota Beat User Manual page 4

4. Upon completing software installation, restart your PC as the installa-
tion screen requests.
b) Hardware Installation
1. Connect the gamepad plug with a USB port or a USB hub and ensure it
is connected correctly.
2. After it is connected, the monitor will show the message "New hard-
ware found" and the standard USB driver will be located for you to be
able finish the easy installation and play games immediately.
3. The system will add an item in the game-controller board automatically,
and you can test the function of gamepad buttons and vibration.
Set-up in Windows System
After setting up the hardware, Windows
Then, start to set-up and configure your gamepad.
a. Select Start \ Setting \ Control Panel \ Game Controllers and
Joysticks.
b. Select the right gamepad "USB, 2-axis 8-button gamepad" from the
Game Controller Menu.
c. Click on "Properties" and then "Calibrate".
d. When the "Controller Calibration" page appears, you can calibrate
the gamepad button functions. If it doesn't work properly, you have to
configure via the "Settings" page as below:
1) Set the gamepad center position, and then press any gamepad
button.
2) Select the range of motion and turn the directional pad 2 or 3 turns,
then press any gamepad button.
3) Confirm the center and press any gamepad button.
4) Click on "Finish" and back to the Game Controller Properties page.
5) Click on "Test page". Please turn the directional pad and press each
functioning button on your gamepad to test the adjustments. If all
functions are correct, then click on "OK".
Note: If the device does not work properly, it means that the above
calibration failed. Please repeat the above calibration again until
the calibration procedure is exactly performed.
will auto-detect the USB device.
®
4