Table of Contents
Advertisement
Quick Links
10 CU. FT. STEEL DUMP CART – MODEL HT-10LRTA
Owner's Manual and Parts List
SAVE THIS MANUAL
You will need this manual for the safety instructions, assembly instructions and parts list. Put it in a
safe, dry place for future reference.
Additional Information/Link to PDF Copy of this Manual:
©2019 Mid West Products, Inc.
-1-
Form No. M53-1603
Advertisement
Table of Contents
Related Manuals for MID WEST PRODUCTS HT-10LRTA
Summary of Contents for MID WEST PRODUCTS HT-10LRTA
- Page 1 10 CU. FT. STEEL DUMP CART – MODEL HT-10LRTA Owner’s Manual and Parts List SAVE THIS MANUAL You will need this manual for the safety instructions, assembly instructions and parts list. Put it in a safe, dry place for future reference.
-
Page 2: Safety Information
To avoid Accidents and/or Injuries, please make sure there is no person around, behind the Dump Cart when in use, especially when the Cart is used on hillsides and ditches. The Cart may lose control in such severe conditions. ©2019 Mid West Products, Inc. Form No. M53-1603... - Page 3 Washers (#23) and 4 Nuts (#24). Step 3: Attach the Tongue Support (#3) to the Bottom Panels using 2 Bolts (#), 2 Washers (#23) and 2 Nuts (#24). Figure 3 to the right. Figure 3 ©2019 Mid West Products, Inc. Form No. M53-1603...
- Page 4 Attach one end of the Latch Spring (#7) to the opening in the Hitch Tongue (#10) and the other end to the top hole in the Latch Spacer (#8) as shown in Figure 7. With the Latch Spring in place, tighten the Bolt described in Step 7. ©2019 Mid West Products, Inc. Form No. M53-1603...
- Page 5 Step 12: See Figure 11 bottom right for bolt positions. Finish bolting Rear Cross Brace (#12) to Bottom Panels (#1) using 6 Bolts (#21), 6 Washers (#23) and 6 Nuts (#24). Figure 11 ©2019 Mid West Products, Inc. Form No. M53-1603...
- Page 6 (#16) and the Side Panels (#14) as shown in Figure 15 to the right. For each Figure 15 Front Corner Brace, use 2 Bolts (#21), 2 Washers (#23) and 2 Nuts (#24). ©2019 Mid West Products, Inc. Form No. M53-1603...
-
Page 7: Parts List
234B2 234B3 234B4 234B5 234B6 234B7 #28 12.5x64 Hitch Pin #29 M6x90 Hex Head Bolt #30 6MM #31 6mm #32 6-8mm 234B8 234B9 Nylon Nut Hex Nut Flat Washer 234B10 234B11 234B12 ©2019 Mid West Products, Inc. Form No. M53-1603... -
Page 8: Parts Diagram
PARTS DIAGRAM ©2019 Mid West Products, Inc. Form No. M53-1603... -
Page 9: Operation
GUARANTEE The merchandise you have purchased from us has been carefully engineered and manufactured under Mid West Products rigid quality standards and should give you satisfactory, dependable operation. However, like all mechanical merchandise, it may occasionally require adjustment or maintenance. - Page 10 • Patented Rear-Dump w/Centered Pull Cord Dumps from Tractor Seat. • Wind Apron protects 15 Bushel Hamper Capacity. • Brush Height Control. • Overall Dim: 44” L x 50” W x 35” H ©2019 Mid West Products, Inc. -10- Form No. M53-1603...
Need help?
Do you have a question about the HT-10LRTA and is the answer not in the manual?
Questions and answers