Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VET TAG Engraver and is the answer not in the manual?

Questions and answers

Summary of Contents for iMARC VET TAG Engraver

  • Page 2: Table Of Contents

    Use of tags or tag holders not manufactured by iMARC, or any modifications to iMARC tag holders or machine will void your warranty, and may cause serious damage to your iMARC Engraver.
  • Page 3: Getting Started

    ETTING TARTED Before you plug in your new iMARC and engrave your first tag, familiarize yourself with some of the components of the machine.
  • Page 4 ETTING TARTED Setting up your iMARC is quick and easy. Plug in the keyboard into the keyboard port. Plug your power cord into the electric receptacle. Plug the cord into any standard (110 Volt) outlet, and switch on the machine.
  • Page 5 & S OLDER NSTALL ETUP Once you’ve turned on your iMARC system, it is now time to install the holders. Your holders need to be installed on the engraving table during HOLDER SETUP. Tag Holder Engraving Table- Engraving Table- With holder installed No holder installed Select the holder that you want to install.
  • Page 6 & S OLDER NSTALL ETUP Pet Tag Holder This is the HOLDER SETUP screen. The current position to be installed will be flashing. Insert your holder into position on the engraving table. Note: For easiest installation and removal, position the holes in the holder directly over the pins in the engraving table, and move the holders directly up or down over the pins.
  • Page 7: Administrative Functions

    All of the functions that you and your managers might require can be found by accessing the holder setup screen. (F4 from the introduction screen) Pet Tag Holder Press F1 to enter The iMARC the correct local contains an time and date. internal clock...
  • Page 8: Setting Up A Rabies Tag

    ETTING ABIES At the INTRODUCTION SCREEN, Press any key Very few steps are required to set up your Rabies tag serialization function. Once you’ve finished with this section, you will be able to engrave all of your clinic’s information with just a few steps. In the Function Screen (shown above) press F5 to setup your Rabies tag number, date and clinic information.
  • Page 9 ETTING ABIES In the TAG SELECTION screen, move through the available tags using the up and down arrow keys. Note: This procedure needs to be followed once for every different tag shape. If the tag you want to engrave does not show up on the screen, press F4 to return to HOLDER SETUP and install the correct holder.
  • Page 10 ETTING ABIES LARGE S T OP SIGN Line 1: VISIONVET Line 2: 17621 BL ACKCANYON Line 3: PHOENIX AZ 85023 Line 4: 602-439-0600 Line 5: - DATE- Line 6: -RN- In the Rabies Tag Setup screen, type in the information you would like on each line, and press enter to move to the next line.
  • Page 11 In the RABIES SEQUENCE SETUP screen, simply enter the sequence number that you want to start with. Note: iMARC will automatically sequence your rabies tags as you make them. Press ESC at any Press Enter to save...
  • Page 12: Engravinga Rabies Tag

    F5 and refer to page 9 and 10. Note: You can only engrave a rabies tag using the standard type style (iMARC Block). To engrave a custom tag using another type style, press F3 and turn to page 17.
  • Page 13 NGRAVING ABIES In the TAG SELECTION screen, select the Rabies tag shape chosen during rabies tag setup. Should you choose a tag that has not been set up other than that one, the screen below will appear. Press F1 and refer to page 8 to set up that tag.
  • Page 14 NGRAVING ABIES Y ou are a bout to engrave a LARGE S TOP SIGN Ensu re thecorrect tag is loaded in correct holder. PressF4 for holder set-u p. To Continue pressENTER To go back p ressESC Pet Tag Holder The door will open and the table will move out for tag insertion. Insert tag into matching position.
  • Page 15 NGRAVING ABIES In the Rabies tag CHECK TEXT screen, confirm that the information entered is correct, and that the date is current. Note: Text will not be enlarged to fit on the screen, but will be expanded or condensed to fit on the finished tag. Press Esc Press F4 to Press Enter...
  • Page 16 YOUR TAG IS NOW ENGRAVING PLEASE WAIT The table will be pulled back into the iMARC and the door will close. While your tag is engraving, you will see the screen shown above. Press Esc at any time to stop the engraving process.
  • Page 17 R. number (same other side of Note: This will Note: The style tag). your tag. bring you back iMARC will Note: The Note: This will to the TAG automatically iMARC will bring you back SELECTION begin engraving automatically to the CHOOSE screen.
  • Page 18: Engravinga Custom Tag

    NGRAVING USTOM From the INTRODUCTION SCREEN, press any key to get started. Note: After a period without keystrokes, the machine will reset to this screen. Engraving your tag is quick and easy. Each option is clearly stated as you follow the steps to your completed tag.
  • Page 19 NGRAVING USTOM In the TAG SELECTION screen, move through the available tags using the up and down arrow keys. If the tag you want to engrave does not show up on the screen, press F4 to return to HOLDER SETUP and install the correct holder. (See pg.
  • Page 20 To engrave clipart onto your iMARC tags, press 8 and turn to page 25 for additional instructions. If your iMARC has your company’s logo stored in it, press 9 to select your logo and enter the letter A to engrave it.
  • Page 21 Type in your information as you would like it to appear on the front of the tag. Keep in mind that iMARC will automatically increase or decrease your type size for optimum coverage.
  • Page 22 NGRAVING USTOM Y ou are a bout to engrave a LARGE S TOP SIGN Ensu re thecorrect tag is loaded in correct holder. PressF4 for holder set-u p. To Continue pressENTER To go back p ressESC Pet Tag Holder The door will open and the table will move out for tag insertion.
  • Page 23 NGRAVING USTOM Using the CHECK TEXT screen, make sure you’ve typed in your information correctly and that you have chosen the correct type style. Note: Text will not be enlarged to fit on the screen, but will be at the proper size on the tag. Press Esc at any Press F4 to Press Enter to...
  • Page 24 YOUR TAG IS NOW ENGRAVING PLEASE WAIT The table will be pulled back into the iMARC and the door will close. While your tag is engraving, you will see the screen shown above. Press Esc at any time to stop the engraving process.
  • Page 25 1. and will other side of to the TAG Note: The automatically your tag. SELECTION iMARC will engrave the Note: This will screen. automatically tag twice, bring you back begin the making the to the CHOOSE...
  • Page 26: Engraving Clipart

    NGRAVING LIPART From the CHOOSE FONT screen, press the number 8. Type information to be eng raved. 04:25:3 0 From the available 06/6/0 6 clipart shown on pages 28 and 29, type the Note: The character you enter here represents the character representing clipart you’ve chosen and the clipart you’ve...
  • Page 27: International Characters

    NTERNATIONAL HARACTERS The iMARC is capable of engraving international characters, however they are not available with every type style. To utilize all of the special characters, you will need to use the iMARC Block type style. Some characters may be available with other type styles.
  • Page 28 To get the letter Æ, you would need to have the caps locks key on, hold the ctrl key and press 4. If you would like to add your company’s logo to your iMARC, 888-99-iMARC call or email us at...
  • Page 29: Clipart

    LIPART Instructions: To use the various clipart available in your iMARC, select the image you want, proceed through the tag selection screens as normal. In the CHOOSE FONT screen, press #8 then simply type the corresponding number of your image in the TEXT ENTRY screen.
  • Page 30 LIPART...
  • Page 31: Troubleshooting

    Resetting the RAM Use this procedure if a large or small shape is missing on the iMARC screen when trying to engrave a tag. This will clear all holders, time and date. Pet Tag Holder From the INTRODUCTION SCREEN, press F4 to go to the HOLDER SETUP screen.
  • Page 32 Technical Support 602-439-0700 Sales 602-439-8818 17621 N. Black Canyon Highway Phoenix, Arizona 85023...

Table of Contents