Table of Contents
Advertisement
Quick Links
Thank you for purchasing a GYMBOSS miniMAX.
***Remove protective screen from front of timer.
TURN ON
| Push any button.
Interval timer will turn off after no use for 5 minutes, or you may select off
TURN OFF |
from the menu.
If left in stopwatch and clock mode timer will not turn off on its own.
Battery:
No Used Batteries Please! We recommend a high quality Energizer or Duracell.
When your battery gets low a battery icon will flash on the screen.
REBOOT a frozen or malfunctioning timer by placing a NEW battery in timer, then using a
pen, push the REBOOT
Procedure document also available here on our website)
There are 3 modes to the GYMBOSS miniMAX.
CLOCK
STOPWATCH
INTERVAL TIMER –
many intervals you wish to time.
1. 1 Interval
2. 2 Intervals
3. 3+ intervals (3 to 25 different intervals in sequence).
4. Multi (2 to 25 different intervals and allows repeating of each interval or
groups of intervals within the 25 intervals. See setup below).
There are 2 menus, the menu allows you to select desired mode, the Setup Menu
allows you to create, save, or recall programs as well as return to the Menu to select
a different mode
www.gymboss.com
BUTTON CONFIGURATION
(See in-depth Troubleshooting and Replacement
button.
the interval timer has 4 separate sections, depending on how
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for GYMBOSS miniMAX
- Page 1 REBOOT a frozen or malfunctioning timer by placing a NEW battery in timer, then using a (See in-depth Troubleshooting and Replacement pen, push the REBOOT button. Procedure document also available here on our website) There are 3 modes to the GYMBOSS miniMAX. CLOCK STOPWATCH ...
- Page 2 MENU SETUP MENU (Turn off) MENU 1 INT (Time 1 interval) >SETUP >2 INT (Time 2 different intervals) RECALL 3+ INT (3-25 different intervals) SAVE MULTI (Up to 25 with repeats and group repeats) BACK STPWCH (Stopwatch) CLOCK Only 3 lines of each menu will be on the screen at any one time and they are located on the top left part of the LCD screen.
- Page 3 If SET is not displayed on screen, you are not in setup and cannot make changes. Set the interval times using the V / Λ buttons. Push SET to move to next interval setup. For 3+ interval mode, after you have set all of your desired intervals select 00:00 for the next interval and push SET to move to the next step of the setup process.
- Page 4 EXPANDED MULTI INTERVAL SETUP MULTI mode allows up to 25 intervals and repeat single intervals, or groups of intervals, within the 25. 05:00 x 1 One 5 minute interval. 00:20 x 8 Using a P causes the timer to alternate this interval with the previous interval, in this case –...
- Page 5 HOW TO REMOVE THE BELT-CLIP 1. Turn the timer so that you are looking at the back. 2. Insert your fingernail on latch between belt clip and START button and pull the latch towards the belt clip while at the same time pushing the belt clip to the right to release.
Need help?
Do you have a question about the miniMAX and is the answer not in the manual?
Questions and answers