Advertisement
Quick Links
NG510/NG511 - QUICK START GUIDE
This document is a quick guide for safely installing and implementing Kerio Control Boxes NG510 and
NG511 UTM appliances.
1. General Safety Instructions
During installation follow these security instructions:
-
The appliance should be placed on a flat surface or securely mounted horizontally in a rack
enclosure.
-
The NG510/NG511 series are intended primarily for server rooms due to noisy performance.
-
Do not attempt to open or disassemble the appliance for any reason.
-
Strictly follow the installation instructions (see section 3).
-
Do not place the appliance near a heat source.
-
Place the appliance in a ventilated space, making sure that the appliance fans and vents are
unobstructed at all times.
-
Do not expose the appliance to liquids of any kind.In the event of liquid intrusion,unplug the
appliance immediately.
-
Verify that the voltage and frequency of the power socket matches the values printed on the
power adapter before plugging in the appliance. Use only the power adapter supplied with the
appliance.
-
Do not place any items on top of the power cable; keep the power cable away from walkways or
other areas where it could pose a tripping hazard.
-
2. Appliance Description
Kerio Control Box NG510 —1U rack mountable appliance
Kerio Control Box NG511 —1U rack mountable appliance
Feature
Serial port
USB ports
Ethernet network ports
Description
Used for connecting to a console with a serial
cable
Input for USB devices
Used for connecting to the Internet and the LAN
with an Ethernet cable
Advertisement
Summary of Contents for GFI Kerio Control Box NG510
- Page 1 Do not place any items on top of the power cable; keep the power cable away from walkways or other areas where it could pose a tripping hazard. 2. Appliance Description Kerio Control Box NG510 —1U rack mountable appliance Kerio Control Box NG511 —1U rack mountable appliance Feature...
- Page 2 After you have set the appliance at a suitable place and plugged it into a power outlet according to the safety instructions,it is time to connect it to the network and configure settings. Screenshot 3: Connecting Kerio Control Box NG510 to the network...
- Page 3 4. Ignore the SSL certificate warnings and proceed to the configuration wizard. 5. Follow the instructions provided by the wizard and configure the appliance. See h ttps://go.gfi.com/?pageid=ControlActivationWizard For troubleshooting purposes, you can use the serial port to connect the console to the appliance. See...
- Page 4 Additional Information For further assistance with configuration refer to additional documentation in https://go.gfi.com/?pageid=ControlManual For online support, resources visit h ttps://support.gfi.com/ or h ttps://forums.gfi.com for community based support.