Advertisement
Now block the suction
Now place hand in front
pipe with thumb so that
of centre till proper
the sanitiser inside
spray starts to come. At
does not fall and put it
this point all the air from
in the tank.
the system has been
removed.
Note: Above shown images are for reference only.
CLEANING & MAINTENANCE
•
Removable tank for refilling and cleaning
•
Sanitiser Refill- open the cover to take the tank out. Fill the sanitiser and put the
tank back
Switch off the
Open the
Remove the tank.
power supply.
upper cover.
Note: Incase spray nozzle that blocked. Please contact your nearest KENT dealer or
branch, Mishandling of the same may lead to discontinue warranty.
Machine is now
ready for use.
Refill sanitiser
Place the tank back.
in tank
3
IMPORTANT SAFETY INSTRUCTIONS
•
If the supply cord is damaged, it must be replaced by the original part in order to
avoid hazard
•
Children should be supervised to ensure that they do not play with the appliance
•
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety
TECHNICAL SPECIFICATIONS
Product
:
Product Code
:
Product Generic Name
:
Product Colour
:
Mounting
:
Electrical Input
:
Capacity of Sanitizer
:
Dispensing Qty.
:
Working Voltage
:
Auto Sensing Distance (range required)
:
Sensing Time
:
Sensor Type
:
Hands to be used (Single or multi)
:
Net Weight
:
Product Dimensions (mm)
:
Total Power Consumption
:
KENT AUTO SANITISER-6
12012
Hand Sanitser
White
Wall-mounting
230 V AC
6 L
Adjustable amount (1-1.5 ml)
24V DC
200mm to 250 mm
200mS Typical
Between sensing 3 seconds gap is required
Infrared Sensor
Will work with both options
5.50 kg
390 (L) X 285 (W) X 440 (H)
40W
4
Advertisement
