Advertisement
Quick Links
Installation Instructions for
Nikko
G
ENERAL RODUCT NFORMATION
P
This product is suitable for wet locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Install the Fixture
1A
NIPPLE
1
1
Feed the power line wires through the crossbar nipple.
Outdoor
I
:
POWER LINE
WIRE
1B
#8-32 SCREW
Attach the crossbar to the electrical box using two #8-32
2
screws provided.
1
980NIKKO
147_, 159_
NIPPLE
2
3
2
CROSSBAR
1.0
Advertisement
Summary of Contents for LBL Lighting Nikko 147 Series
- Page 1 Installation Instructions for 980NIKKO Nikko 147_, 159_ Outdoor ENERAL RODUCT NFORMATION This product is suitable for wet locations. This product can be dimmed with a standard incandescent dimmer. This instruction shows a typical installation. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Page 2 COVER SCREW WASHER NIPPLE Make sure the fixture base is level, and secure it to the nipple with a lock washer and nut. Remove all the screws from the front of the fixture. Lift the cover off of the fixture. FIXTURE BASE SCREW REFLECTOR...
- Page 3 Install the Lamp and Cover Caulk around the base with waterproof construction sealant. C AUTION:To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture. MAX 60 Watt type B10 torpedo medium base lamp. Screw the lamp base into the socket.
- Page 4 7400 Linder Ave, Skokie, IL 60077 800.323.3226 - 847.626.6300 www.lbllighting.com © 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a registered trademark of LBL Lighting. LBL Lighting reserves the right to change specifications for product improvements without notification. A Generation Brands Company...