LBL Lighting Nikko 147 Series Installation Instructions page 2

1C
3
3
3 Remove all the screws from the front of the fixture.
Lift the cover off of the fixture.
4
1D
FIXTURE BASE
5
SCREW
Remove the screws on the reflector.
5
Lift the reflector out of the fixture base.
6
COVER SCREW
3
5
REFLECTOR
1E
3
7 7
Make sure the fixture base is level, and secure it to the nipple
with a lock washer and nut.
1F
8
Connect the hot power line wire to the black socket wire with
a wire nut.
9 Connect the neutral power line wire to the white socket wire
with a wire nut.
10
Connect the fixture to a suitable ground according to local
electrical codes.
11 Reattach the reflector to the fixture base.
2
7
NUT WASHER NIPPLE
8 9