Table of Contents
Advertisement
Quick Links
PERFECT WALKER II UNBOX & SET-UP GUIDE
Setting up your Perfect Walker is very simple - just follow these
easy instructions. You will be using your walker in just a few
minutes. We recommend that you lay out the components
to ensure that you have easy access to them at each step.
Page 1
Step 1
Unpack the Perfect Walker II and lay out the parts for easy access.
Step 2
Loosen and remove the 4 large thumbwheel screws
(see image below) from the black lower frame.
Step 3
Fold out each of the 4 wheel/leg combinations to their full
positions, ensuring that the screw holes are lined up between
the frame and the legs.
Step 4
Insert the 4 thumbwheels screws that were removed in Step 2 into
the 4 holes in the lower legs. The thumbwheel screws are to be
inserted from the outside of the frame. The bolts may be a little
tight when inserting into the holes - this is normal. Once
inserted as far as they can go, you will screw them into place
and lock the wheels into place.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FirstStreet Perfect Walker II
Summary of Contents for FirstStreet Perfect Walker II
- Page 1 Page 1 Step 1 Unpack the Perfect Walker II and lay out the parts for easy access. Step 2 Loosen and remove the 4 large thumbwheel screws (see image below) from the black lower frame.
- Page 2 Page 2 Step 5 Unfold the Perfect Walker II so that the seat is locked into place. Push firmly down on both sides of the seat until you hear the seat click into its locked position. It will look like the image below when locked into place.
- Page 3 Leave it a little loose on the first side. Repeat this step for the opposite side. Now tighten both sides firmly. Your Perfect Walker II is now ready for use. Please use it only according to the directions and instructed use guidelines.
Need help?
Do you have a question about the Perfect Walker II and is the answer not in the manual?
Questions and answers